 | #12 HITCH PIN Box Qty. / 25
Brand: The Nutty Company
#12 HITCH PIN Box Qty. / 25 | *$10.20 |
| #6 HITCH PIN Box Qty. / 100
Brand: The Nutty Company
#6 HITCH PIN Box Qty. / 100 | *$9.80 |
| #8 HITCH PIN Box Qty. / 50
Brand: The Nutty Company
#8 HITCH PIN Box Qty. / 50 | *$8.70 |
 | #901176AB 6' GRN T Fence Post
Brand: MIDWEST AIR TECH/IMPORT Part Number: 901176AB
6', Green, Studded Tee Fence Post, Rail Steel. 1.25 LB/FT. | *$8.20 |
 | - BOBCAT Skid-Steer Loader - 1997-1999, Model# 763
Brand: Bobcat
Save big on these used skid-steer loader units! Low total hours of use means great condition. New batteries and at least 50deg tire tread remaining. Replacement seats, new tires and attachments are available. 4-cylinder diesel engine. Truck ship. U.S.A. | *$16,499.99 |
 | - BOBCAT Skid-Steer Loader - 1997-1999, Model# 773
Brand: Bobcat
Save big on these used skid-steer loader units! Low total hours of use means great condition. New batteries and at least 50deg tire tread remaining. Replacement seats, new tires and attachments are available. 4-cylinder diesel engine. Truck ship. U.S.A. | *$17,699.99 |
 | - BOBCAT Skid-Steer Loader - 1997-1999, Model# 863
Brand: Bobcat
Save big on these used skid-steer loader units! Low total hours of use means great condition. New batteries and at least 50deg tire tread remaining. Replacement seats, new tires and attachments are available. 4-cylinder diesel engine. Truck ship. U.S.A. | *$18,299.99 |
 | - BOBCAT Skid-Steer Loader - 1999-2001, Model# 763G
Brand: Bobcat
Save big on these used skid-steer loader units! Low total hours of use means great condition. New batteries and at least 50deg tire tread remaining. Replacement seats, new tires and attachments are available. 4-cylinder diesel engine. Truck ship. U.S.A. | *$17,499.99 |
 | - BOBCAT Skid-Steer Loader - 1999-2001, Model# 773G
Brand: Bobcat
Save big on these used skid-steer loader units! Low total hours of use means great condition. New batteries and at least 50deg tire tread remaining. Replacement seats, new tires and attachments are available. 4-cylinder diesel engine. Truck ship. U.S.A. | *$18,699.99 |
 | - BOBCAT Skid-Steer Loader - 1999-2001, Model# 863G
Brand: Bobcat
Save big on these used skid-steer loader units! Low total hours of use means great condition. New batteries and at least 50deg tire tread remaining. Replacement seats, new tires and attachments are available. 4-cylinder diesel engine. Truck ship. U.S.A. | *$19,299.99 |
 | - Woods-N-Water Plotmaster - 3-Point, Category 1, 6ft. Length
Brand: Woods-n-Water
The Plotmaster III is a multi-use, all-in-one harrow/plow/cultivator/seeder/cultipacker/drag with metal grating. Its expanded capabilities require a 30 HP or larger tractor. The Plotmaster III is designed to plow 72in. wide, cut 68in. wide and seed 60in. wide. Seeder attachment boasts a 150-lb. capacity. Made of heavy-duty steel components and comes with a 3-point hitch, so no electric lift system is needed. Ideal for establishing and maintaining large gardens, fields and foodplots. U.S.A. Hitch Type: 3-Point, Category Type: 1, Working Width (in.): Plow - 72, Cut - 68, Seed - 60, Required HP: 30, Blades (qty.): 8 -18 Notched Discs, 5 - S Tines | *$5,999.99 |
 | - Yanmar Mini Excavator - 26 HP, Year 1993-96
Brand: Atlas
Convenient and compact excavator is ideal for a wide variety of landscaping and agricultural work. Features a backfill bucket and digging depth of 8 1/2ft. Models available are 1993-1996 and are used in good condition. Powered by a 3 cylinder diesel Yanmar engine. Each unit has been thoroughly inspected for mechanical problems and leaks and will come with at least 50% tread. Truck ship. | *$14,999.99 |
 | 08010-92 Circuit Pk S100 New
Brand: ZAREBA SYSTEM(AMER.FARM)P Part Number: 08010-92/081
POWER PACK MODULE Fits only new style S100 controller 08010-92 CIRCUIT PAK FOR S100A | *$40.11 |
 | 1" x 72" San Angelo Bar
Brand: Truper Herramientas Model: BAP-175-C/32474 Part Number: BAP175C
1" x 72" San Angelo Bar, Press Or Drop Forged With Rust Resistant Black Finish For Superior Durability. | *$26.04 |
 | 1'W Machinery Wire Fence Partition Panel
Brand: WIREWAY HUSKY Part Number: G0105
Machinery Partition Panel Provides a barrier between employees and potential hazards. Meets OSHA regulations for guarding dangerous machinery, conveyor belts and electrical switchgear and EPA hazardous waste storage standards. Durable woven 10 gauge wire construction provides clear visibility. Partitions can be easily installed for quick removal or more permanently for maximum security with all supplied hardware. Panels measure 5'H and attach to post 1' above floor for sweep space. Easy to install, remove or expand. Bright yellow enamel finish. | *$50.95 |
 | 1.5" Brown Polytape for Electric Fence
Brand: LACME
You are looking at a roll of 1 1/2 inch Brown polytape with 13 stainless steel wires for excellent shocking ability. This is a tape great for areas that demand a low tone or earth colors. Environmentally friendly and excellent for horse pastures in residential areas. This polytape has 13 stainless steel wires for excellent conductivity with a breakstrength of 530 lbs and comes in rolls of 656 feet. This is one of our best selling 1.5 inch polytapes. | *$46.00 |
 | 1.5" Burgundy Polytape for Electric Fence
Brand: LACME
1 1/2 inch Burgundy polytape that has excellent visibility due to its unique color. It is great to use for subdividing horse pastures or for temporary grazing. This polytape has excellent conductivity with a breakstrength of 550 lbs. | *$45.00 |
 | 1.5" Green Polytape for Electric Fence
Brand: LACME
You are looking at a roll 1.5 inch Green Polytape. Excellent for a temporary fence or use as a cross fence in areas that require environmentally friendly earth tone colors. Great for pastures or runways. This polytape has 8 tinned copper wires for excellent conductivity with a breakstrength of 530 lbs. | *$48.00 |
 | 1.5" White Polytape for Electric Fence
Brand: LACME
1.5 inch white polytape with 13 stainless steel wires. Very good tape at a very reasonable price. | *$38.00 |
| 10'W Machinery Wire Fence Partition Panel
Brand: WIREWAY HUSKY Part Number: G1005
Machinery Partition Panel Provides a barrier between employees and potential hazards. Meets OSHA regulations for guarding dangerous machinery, conveyor belts and electrical switchgear and EPA hazardous waste storage standards. Durable woven 10 gauge wire construction provides clear visibility. Partitions can be easily installed for quick removal or more permanently for maximum security with all supplied hardware. Panels measure 5'H and attach to post 1' above floor for sweep space. Easy to install, remove or expand. Bright yellow enamel finish. | *$193.95 |
 | 10-1/2" Fence Plier
Brand: Austin Bazaar Affiliate | *$17.95 |
 | 10-1/2" Fencing Pliers
Brand: Michigan Industrial Tools Part Number: 3566
One Tool Covers Most Fence Repair
and Construction Applications
Features Two Wire Splicing Channels, Milled Hammer Face, Sharp Staple Puller/Ripper, Twin Wire Cutters, and a Gripping Jaw | *$7.65 |
 | 10PK WHT Cap Insulator
Brand: Zareba Systems Part Number: WSC10N
Red Snap'r, 10 Pack, White, Snap Cap Insulator, For All Fence Wires, Including PTW6, 1-1/2" Poly Tape, Fits On Both T-Posts & Wooden Posts, Securely Holds All Electric Fence Wires & Tapes To Wooden Posts & T-Posts & Protects Horses From Impaling Themselves On T-Posts For Even Extra Safety. | *$11.96 |
 | 11in. Fence Pliers
Brand: Northern Tool & Equipment
11in. fence pliers with vinyl grips | *$5.98 |
 | 13,000 Watt P.T.O. Generator
Brand: NorthStar
Single-phase generator cranks out 100 Amps @ 120V, 50 Amps @ 240V. Requires 24 PTO HP or more for rated output: 13,000 surge Watts and 12,000 continuous Watts. Industry standard 1 3/8in., 6-spline input shaft is geared for 540 RPM. 100in. copper windings, metal construction, 100 Amp thermal magnetic breaker and plastic shield provide high performance, durability, long life and safe operation. Outlets include welding receptacle and four 120V 20 Amp receptacles and voltmeter. Pushbutton reset circuit breakers and 2-year warranty. Truck Ship. | *$1,249.99 |
 | 1320'HD Elec Fence Wire
Brand: Zareba Systems Model: PW-400 Part Number: RSW1320HD
1320' Heavy Duty Electric Poly Fence Wire, Made Of 24 Strands Of .015 Diameter, High Density Polyethylene With 6 Strands Of .007 Diameter Stainless Steel, Yellow & Black In Color For High Visibility, Very Light But Very Strong, Extremely Conductive, UV Inhibitors Added To Ensure Ling Life, Use With All Types Of Animals & Livestock, Do Not Power With Continuous Current Or Weed Chopper Fence Controllers. | *$28.75 |
| | 15Ft Spring Gate W/Handle
Brand: Twin Mountain Fence D Part Number: TA245
Plastic Handle With Metal Spring. Spring gate 15 . Quality galvanized wire springs complete with anchor and activator fittings. Attach to fence at gate entrance. | *$15.20 |
 | 16x12 WHT Trim Fence
Brand: Greenes Fence Model: RC24W Part Number: RC 24W
16" x 12', White, Gothic Top Trim Fence, Trims Driveways & Walkways, Protects Plants, Vegetables, Flowers, Young Shrubs & Trees. | *$17.80 |
 | 1793 Bullgater Gate Handle
Brand: Bull Gater Ltd Part Number: 1793
High quality, high-impact styrene, plated metals parts. Heavy duty gate hook with galvanized metal spine for demanding conditions. | *$4.77 |
 | 2" Mega Polytape for Electric Fence
Brand: LACME
2 inch wide tape with 14 tin coated wires. This is an excellent tape for any of your fencing applications. It has very good wear characteristics and blue border for better visibility. | *$55.00 |
 | 2" Mega Polytape for Electric Fence - 185'
Brand: LACME
On sale at a GREAT PRICE. You won't find this tape anywhere else for a price like this. This tape has 14 internal wires and the length of the roll is 185ft. These 14 tin copper wires are placed together in two tight bands which allows a wire to become electrified again should it get broken and makes a larger area of contact for the animal to touch insuring maximum shock. Excellent visibility due to its width. Make sure to get some 2 inch tape buckles Part number 102.571 | *$10.00 |
 | 2" Polytape insulator for Electric Fence - Black
Brand: Woodstream
Snap on "T" post insulator for 2" tape. It has a tight fit so insulator doesn't pop off. Even though the picture is of a white insulator, you are buying a pack of 25 black insulators. The 25 pack weighs 1.5lbs. | *$6.50 |
| 2" Polytape insulator for Electric Fence - White
Brand: Woodstream
Snap on white "T" post insulator for 2" tape. It has a tight fit so insulator doesn't pop off. The 25 pack weighs 1.5lbs. | *$6.50 |
 | 2" Reinforced Mega Polytape for Electric Fence
Brand: LACME
2 inch wide Reinforced tape with 14 tin coated wires. This is an excellent tape for any of your fencing applications. It has very good wear characteristics and blue border for better visibility. | *$75.00 |
| 2" Reinforced Mega Polytape for Electric Fence - 185'
Brand: LACME
18 wires of highly conduction tin coated copper wire placed together in two bands. This allows a wire to become electrified again should it get broken. It also makes a large area of contact that gives the animal maximum shock when they touch the tape. Great for high wind areas. 1,100lb breakstrength. | *$12.00 |
| 2'W Machinery Wire Fence Partition Panel
Brand: WIREWAY HUSKY Part Number: G0205
Machinery Partition Panel Provides a barrier between employees and potential hazards. Meets OSHA regulations for guarding dangerous machinery, conveyor belts and electrical switchgear and EPA hazardous waste storage standards. Durable woven 10 gauge wire construction provides clear visibility. Partitions can be easily installed for quick removal or more permanently for maximum security with all supplied hardware. Panels measure 5'H and attach to post 1' above floor for sweep space. Easy to install, remove or expand. Bright yellow enamel finish. | *$55.95 |
| | 20Ft Spring Gate W/Handle
Brand: Twin Mountain Fence D Part Number: TA2456
Plastic. Gate for temporary fence. Attach to fence at gate entrance. | *$17.44 |
 | 25CT YEL TPost Extender
Brand: DARE PRODUCTS Part Number: SNUG-X5TP-25
25 Count, Yellow, Snug T-Post Insulator Extender, Extends Wire 5" From Post, For 1.25 & 1.33 Posts. | *$6.72 |
 | 2pc Fence & Nail Plier Set
Brand: ToolsNow Part Number: 5269 | *$9.99 |
 | 3 Ton Chain Hoist
Brand: Boston Industrial Model: CH3 | *$45.95 |
| 3'W Machinery Wire Fence Partition Panel
Brand: WIREWAY HUSKY Part Number: G0305
Machinery Partition Panel Provides a barrier between employees and potential hazards. Meets OSHA regulations for guarding dangerous machinery, conveyor belts and electrical switchgear and EPA hazardous waste storage standards. Durable woven 10 gauge wire construction provides clear visibility. Partitions can be easily installed for quick removal or more permanently for maximum security with all supplied hardware. Panels measure 5'H and attach to post 1' above floor for sweep space. Easy to install, remove or expand. Bright yellow enamel finish. | *$78.95 |
| 4'W Machinery Wire Fence Partition Panel
Brand: WIREWAY HUSKY Part Number: G0405
Machinery Partition Panel Provides a barrier between employees and potential hazards. Meets OSHA regulations for guarding dangerous machinery, conveyor belts and electrical switchgear and EPA hazardous waste storage standards. Durable woven 10 gauge wire construction provides clear visibility. Partitions can be easily installed for quick removal or more permanently for maximum security with all supplied hardware. Panels measure 5'H and attach to post 1' above floor for sweep space. Easy to install, remove or expand. Bright yellow enamel finish. | *$99.95 |
| | 41 In Polypost Step In White
Brand: Twin Mountain Fence D Part Number: TP434
Plastic Post With Steel Point At End. Fence post used in temporary fencing for wires and tapes. Fence post for temporary fencing. | *$4.03 |
 | 415t-11/16" Pole Bit (585-46611) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-46611. Single spur, cutter, and side lip are designed for boring through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>Remove the taper square shank and use in an electric drill or hand brace<br>Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the bit where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 11/16 in<li>Bit/Blade Mounting Cutting Flute Length = 12 in<li>Overall Length = 18 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Point Shape = Screw+Spur+Cutter<li>Shank Size Symbol = 5/16 in. Hex<li>Shank Spiral Angle = CW<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 415t-11/16" Pole Bit, Buy 415t-11/16" Pole Bit, Wholesale 415t-11/16" Pole Bit, 024721466112, 46611, Auger Drill Bits | *$22.68 |
| 415t-15/16" Pole Bit (585-46615) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-46615. Single spur, cutter, and side lip are designed for boring through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>Remove the taper square shank and use in an electric drill or hand brace<br>Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the bit where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 15/16 in<li>Bit/Blade Mounting Cutting Flute Length = 12 in<li>Overall Length = 18 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Point Shape = Screw+Spur+Cutter<li>Shank Size Symbol = 5/16 in. Hex<li>Shank Spiral Angle = CW<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 415t-15/16" Pole Bit, Buy 415t-15/16" Pole Bit, Wholesale 415t-15/16" Pole Bit, 024721466150, 46615, Auger Drill Bits | *$27.38 |
| 416t-13/16" Pole Bit (585-46713) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-46713. Single spur, cutter, and side lip are designed for boring through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>Remove the taper square shank and use in an electric drill or hand brace<br>Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the bit where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 13/16 in<li>Bit/Blade Mounting Cutting Flute Length = 18 in<li>Overall Length = 24 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Point Shape = Screw+Spur+Cutter<li>Shank Size Symbol = 5/16 in. Hex<li>Shank Spiral Angle = CW<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 416t-13/16" Pole Bit, Buy 416t-13/16" Pole Bit, Wholesale 416t-13/16" Pole Bit, 024721100290, 46713, Auger Drill Bits | *$36.24 |
 | 418h-11/16" Power Pole Bi (585-46911) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-46911. Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>All bits feature 7/16" adaptable hex shank<br>Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 11/16 in<li>Bit/Blade Mounting Cutting Flute Length = 18 in<li>Overall Length = 23 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Packing Type = Bulk<li>Point Shape = Brad+Spur+Cutter<li>Shank Type = Cylinder+Hex<li>Spiral Angle = CW<li>Structure = Solid<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 418h-11/16" Power Pole Bi, Buy 418h-11/16" Power Pole Bi, Wholesale 418h-11/16" Power Pole Bi, 024721469113, 46911, Auger Drill Bits | *$28.71 |
| 418h-13/16" Power Pole Bi (585-46913) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-46913. Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>All bits feature 7/16" adaptable hex shank<br>Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 13/16 in<li>Bit/Blade Mounting Cutting Flute Length = 18 in<li>Overall Length = 23 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Packing Type = Bulk<li>Point Shape = Brad+Spur+Cutter<li>Shank Type = Cylinder+Hex<li>Spiral Angle = CW<li>Structure = Solid<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 418h-13/16" Power Pole Bi, Buy 418h-13/16" Power Pole Bi, Wholesale 418h-13/16" Power Pole Bi, 024721469137, 46913, Auger Drill Bits | *$36.24 |
| 418h-3/4" Power Pole Bit (585-46912) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-46912. Single spur, cutter, and side lip design bore through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>All bits feature 7/16" adaptable hex shank<br>Full-length heat treatment guards against bending in heavy-duty applications and strengthens the twist where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 3/4 in<li>Bit/Blade Mounting Cutting Flute Length = 18 in<li>Overall Length = 23 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Packing Type = Bulk<li>Point Shape = Brad+Spur+Cutter<li>Shank Type = Cylinder+Hex<li>Spiral Angle = CW<li>Structure = Solid<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 418h-3/4" Power Pole Bit, Buy 418h-3/4" Power Pole Bit, Wholesale 418h-3/4" Power Pole Bit, 024721469120, 46912, Auger Drill Bits | *$34.35 |
 | 41h18-5 11/16" Impact Bi (585-48111) Category: Auger Drill Bits
Brand: Irwin
Item #: 585-48111. Single spur, cutter, and side lip bore through creosoted poles without clogging, binding, or stopping to clear chips<br>Extra-long twist is ideal for boring large poles, construction timbers, and for multiple timber applications<br>Hex shank design for use in impact wrench drills<br>Full-length heat treated bit guards against bending in heavy-duty applications and strengthens the bit where the greatest strain occurs<br>Bit can be resharpened<br>Medium-fast screw point ideal for general wood boring applications <p><ul><li>Cutting Diameter = 11/16 in<li>Bit/Blade Mounting Cutting Flute Length = 15 in<li>Overall Length = 18 in<li>Applicable Materials = Wood<li>Measurement No. of Flutes = 1<li>Point Shape = Screw+Spur<li>Shank Size Symbol = 5/8 in<li>Shank Type = Hex<li>Spiral Angle = CW<li>Type = Auger Bit</ul> <br>Customers also search for: Discount 41h18-5 11/16" Impact Bi, Buy 41h18-5 11/16" Impact Bi, Wholesale 41h18-5 11/16" Impact Bi, 024721481115, 48111, Auger Drill Bits | *$33.66 |
