 | Hydor Koralia #4
Brand: Hydor Koralia Pump Part Number: 00501
The Hydor Koralias are a new innovative range of circulation pumps for aquariums. The exclusive Hydor design and technology guarantee a continuous and powerful water flow which can be directed freely thanks to the special sphere shaped connection to the exclusive combination suction cup and magnet support. High performance, low energy consumption, quick and easy maintenance. The magnet can safely hold Koralias applied in tanks with glass (or acrylic) up to 15mm thick. | *$44.00 |
 | Hydor Koralia 1 Circulation Pump/Powerhead UL 400 gph
Brand: Hydor Part Number: 841421004983
Koralia is a new innovative range of aquarium circulation pumps.This pump`s water flow is at the same time powerful and delicate making it ideal for marine and reef tanks.Features: Unique patented* magnet + suction cup support included!Incredible stability in any position in aquariums with glass up to 15mm thick.Magnet is specially covered to prevent corrosion. Adjustable flow direction!The special sphere shaped connection makes flow directing quick, simple and fully adjustable. High performance, low energy consumption!Unique patented* impellers designed by Hydor guarantee exceptional hydraulic performance with low energy consumption.* Int. patent pending  115V ~ 60Hz Model Flow Rate Power Absorbed Koralia 1 400gph 3.5WNote: Hydor Koralias are not intended for use with wavemakers | *$34.32 |
 | Hydor Koralia 3 Controllable Pump/Powerhead
Brand: Hydor Part Number: 841421005928
Koralia 3 12VLow Voltage Controllable PumpsCirculation, oxygenation and the creation of wave effects and tides are the secret to maintain healthy even the most delicate corals. MARINE Professional equipment is an exclusive professional line created by Hydor to fulfill the needs of the most demanding fish keepers. Koralia 12V is a low voltage, Low consumption controllable pump ideal for water movement in marine aquariumsThe Koralia 3 12V range is specifically designed for & can be used only with the Hydor Koralia Wavemaker system.Unique Patented Magnet + Suction Cup Sup Support:Makes positioning Koralia easy and safe anywhere in your aquarium. Adjustable Flow: Rotate the pump as you prefer thanks to the sphere shaped connection and direct the flow to better suit the aquarium needs. Gentle or Powerful Flow: Wide and gentle or width concentrator nozzle powerful and direct. Low Voltage Safety: All models have a super safe rubber cords with waterproof connectors that plug into the WAVEMAKER control system. Complete Range of Models: From Koralia Nano 12V to Koralia 4 12V. Propeller shaped rotorFor super performance from 260 to 1400galVery low power consumptionFrom 0.6 to 13.7 W. Min 1.6W, Max 10W Flow Rate: Min 370 GPH, Max 950 GPH | *$57.95 |
 | Hydor Koralia 3 Wtr Circulation Pump 850 Gph - P19301
Brand: Hydor Part Number: 038034
Designed to be super efficient and longlasting with very low energy consumption compared to traditional circulation pumps.Unique patented magnet suction cup support included.Incredible stability in any position.Place any location in aquarium to move water, position adjustable output as desired.Attach unit with included magnets.Plastic/Metal 10 Watts 2 7/8 X 5 7/8 DimensionsDimensions (L x W x H):8 x 4 x 4.5 | *$50.83 |
 | Hydor Koralia Magnum 7 Circulation Pump/Powerhead 2800 gph
Brand: Hydor Part Number: 841421006239
Koralia 7 Magnum2800GPH / 12W Power ConsumptionThe new Koralia models 5-6-7-8 guarantee unbelievable performance for probably the lowest power consumption of any pump on the market. Equipped with an electronic start up system, new technology rotors and propellers, compact in size, these new model will quickly become leaders in their flow categories (6.500-8.500-10.500-12.500 l/hr). Koralia Magnums have a pleasant design and come with a powerful magnet-suction cup support that rotates to direct water flow easily. Koralias can be positioned safely glass, anywhere in the aquarium. | *$168.01 |
 | Hydor Koralia Nano (Mini) Pump/Powerhead 240gph
Brand: Hydor Part Number: 841421005485
Koralia is a new innovative range of aquarium circulation pumps.This pump`s water flow is at the same time powerful and delicate making it ideal for marine and reef tanks.Features: Unique patented* magnet + suction cup support included!Incredible stability in any position in aquariums with glass up to 15mm thick.Magnet is specially covered to prevent corrosion. Adjustable flow direction!The special sphere shaped connection makes flow directin quick, simple and fully adjustable. High performance, low energy consumption!Unique patented* impellers designed by Hydor guarantee exceptional hydraulic performance with low energy consumption.* Int. patent pending  115V ~ 60Hz Model Flow Rate Power Absorbed Koralia Nano 240gph 3.5WNote: Not compatible with wavemakers | *$27.71 |
 | Hydor Koralia Wavemaker 2, Low Voltage Pump Controller
Brand: Hydor Usa Inc Part Number: 00588
The Hydor Koralia Wavemaker system is designed specifically for use connected to the Koralia 12V pumps (Koralia Nano 12V, Koralia #1 12V, Koralia # 2 12V, Koralia # 3 12V & Koralia # 4 12V). The Wavemaker 2 can control two Koralia 12V pumps (pumps not included).
Wavemaker Functions: | *$289.99 |
 | Hydor Mini Aquarium Heater 7.5 Watt for tanks up to 5 gallons
Brand: Hydor Part Number: 8-41421-00319-1
MINI heater 7.5 Watt for small aquariums and fish bowls up to 20 liters (5 gal)The Hydor Mini Heater is specially designed for small aquariums and fish bowls up to 5 gallons. Easy installation and quick maintenance. Perfect for mini-tanks due to very compact size. Safe and reliable thanks to the patented PTC (Positive Thermal Coefficient) film heating element. Ideal for use in glass or acrylic tanks. The Mini Heater can be completely buried within the gravel if desired. As with any heating device, it is recommended that the temperature be monitored by the use of a thermometer. If the ambient room temperature rises above 76 F or other preferred temperature, simply remove or unplug the heater until needed again. For use in freshwater and marine aquariums.Features: Extra small: easy to hide in mini-tanks and bowls. Extra safe even under gravel. Completely submersible, ideal for use in both glass and acrylic tanks. No damage if left running dry. Helps increase by a few degrees Celsius/Fahrenheit the water temperature of mini aquariums compared to the ambient/room temperature where it is positioned. Two year manufacturer`s warranty. | *$15.00 |
 | Hydor NRG CO2 Disposable Cartridge 74 gm
Brand: Hydor Usa Inc Part Number: 00423
Replacement CO2 cartridge for the Hydor CO2 Green NRG Exclusive | *$18.95 |
 | Hydor SELTZ L30 Pump 320 gph
Brand: Hydor Part Number: 841421000152
Hydor SELTZ L30 Pump UL Listed 320 GPHMulti-use centrifugal pump for fresh water and marine aquariums.The Pico and Seltz line of water pumps offers outstanding value coupled with exceptional features. Both series include flow controls. The Seltz line of water pumps can be used in a submersible setting or non submersed application. The Seltz line offers quiet and reliable operation in any appropriate aquatic setting. Additional features include low power consumption and maximum safety provided by thermal protection against overheating. All flow rates depend upon use and applications. For freshwater or marine use. UL Listed.Features: For submersible and external use. Flow control system for regulation of outlet. Filter sponge inside pump-body. Adjustable base-support with suction cups. Suitable for protein skimmers. Two year manufacturer`s warranty.Specifications: Tubing: 1/2" Power: 23W Flow Rate: 320gph Max Head: 75" | *$65.51 |
 | Hydor Theo 50 Watt Heater
Brand: Hydor Theo Part Number: 00034
Maximum security: : THEO is shock resistant thanks to the PTC heating element and the shatterproof glass tube.
Self-limiting: : the patented PTC heating system guarantees operation in complete safety because in case of dry running there is no danger for damage. | *$20.00 |
 | Hydor THEO Heater 100 Watt
Brand: Hydor Part Number: 8-41421-00035-0
Theo 100W For Aquariums 1426 gallonsNew aquarium heater functioning with the exclusive PTC (Positive Thermal Coefficient) technology. The Hydor Theo heater line features PTC patented thermal technology which makes it among the safest aquarium heater lines on the market. UL Listed by design, not by the use of accessories. Made from specially engineered shatterproof glass which, while not unbreakable, is designed to resist breakage in most normal aquarium situations. Highly accurate due to the use of precise micro-switch technology. For use in freshwater and marine aquariums. The 50W & 100W/150W models, at 7" & 8.9" respectively, are among the smallest sized heaters on the market. The Theo "minimum water line" requirement must be followed for proper operation.Features: The first shatter-proof heater thanks to the peculiar glass tube. Maximum security: THEO is shock resistant thanks to the PTC heating element and the shatterproof glass tube. Free positioning in aquarium with supplied suction cups. Self-limiting: the patented PTC heating system guarantees operation in complete safety because in case of dry running there is no danger for damage. Two year manufacturer`s warranty. | *$27.71 |
 | Hydro I Sponge Filter
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HS910
The Hydro-Sponge I Filter provides both mechanical and biological filtration for aquariums up to 10 gallons. Aerobic bacteria colonize the sponge, providing a bacterial substrate to facilitate the nitrogen cycle. In addition, the Hydro-Sponge traps large waste particles, mechanically cleaning the water. The Hydro-Sponge filters are designed for stackablility to increase the filtering capacity. | *$5.89 |
 | Hydro II Sponge Filter
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HS920
The Hydro-Sponge II Filter provides both mechanical and biological filtration for aquariums up to 10 gallons. Aerobic bacteria colonize the sponge, providing a bacterial substrate to facilitate the nitrogen cycle. In addition, the Hydro-Sponge traps large waste particles, mechanically cleaning the water. The Hydro-Sponge filters are designed for stackablility to increase the filtering capacity. | *$7.98 |
 | Hydro III Sponge Filter
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HS930
The Hydro-Sponge III Filter provides both mechanical and biological filtration for aquariums up to 30 gallons. Aerobic bacteria colonize the sponge, providing a bacterial substrate to facilitate the nitrogen cycle. In addition, the Hydro-Sponge traps large waste particles, mechanically cleaning the water. The Hydro-Sponge filters are designed for stackablility to increase the filtering capacity. | *$8.49 |
 | Hydro IV Sponge Filter
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HS940
The Hydro-Sponge IV Filter provides both mechanical and biological filtration for aquariums up to 80 gallons. Aerobic bacteria colonize the sponge, providing a bacterial substrate to facilitate the nitrogen cycle. In addition, the Hydro-Sponge traps large waste particles, mechanically cleaning the water. The Hydro-Sponge filters are designed for stackablility to increase the filtering capacity. | *$9.95 |
 | Hydro V Sponge Filter
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HS950
The Hydro-Sponge V Filter provides both mechanical and biological filtration for aquariums up to 125 gallons. Aerobic bacteria colonize the sponge, providing a bacterial substrate to facilitate the nitrogen cycle. In addition, the Hydro-Sponge traps large waste particles, mechanically cleaning the water. The Hydro-Sponge filters are designed for stackablility to increase the filtering capacity. | *$10.75 |
 | Hydro-Lifts - 12 in. - 2 pk
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HL810
Hydro-Lifts are for use with the Hydro-sponge filters, undergravel filters, and box filters . Package contains: 2 uplift tubes 2 rigid airline tubes 2 airstones, 2" | *$2.99 |
 | Hydro-Lifts - 24 in. - 2 pk
Brand: AQUARIUM TECHNOLOGY INC. Part Number: HL830
Hydro-Lifts are for use with the Hydro-sponge filters, undergravel filters, and box filters . Package contains: 2 uplift tubes2 rigid airline tubes2 airstones, 2" | *$4.99 |
 | Hydrocotyle Silk Plant - Small
Brand: Penn Plax Part Number: PPS4
Authentic Underwater plant are life-like that once they're in the aquarium, you can't tell them for the real thing. (Hydro Cotyle) (4" tall) | *$2.19 |
 | HYDROKABLE Cable Heater 100W 32.8 ft 40/65 gal CE
Brand: Hydor Model: T04407 Part Number: T04407
Hydor Hydrokable Ug Heatr 100W | *$34.99 |
 | HYDROKABLE Cable Heater 25W 14.1 ft 10/18 gal CE
Brand: Hydor Model: T04107 Part Number: T04107
Hydor Hydrokable Ug Heater 25W | *$25.49 |
| HYDROKABLE Cable Heater 50W 19.7 ft 16/35 gal CE
Brand: Hydor Model: T04207 Part Number: 00329
Hydor Hydrokable Ug Heater 50W | *$26.35 |
| HYDROKABLE Cable Heater 75W 24.6 ft 30/50 gal CE
Brand: Hydor Model: T04307 Part Number: T04307
Hydor Hydrokable Ug Heater 75W | *$31.99 |
 | Hydrometer - Thermometer - 12 in.
Brand: ROLF C HAGEN Part Number: A9206
Proper salt content is vital to the health and well being of captive marine species. Use the Hagen Aquarium Hydrometer to determine actual specific gravity of marine water aquariums on an ongoing basis. Ensure all replacement water has the same salinity as the aquarium. | *$9.49 |
 | HYDROSET Electronic Thermostat with Temp Dial CE
Brand: Hydor Model: T03301 Part Number: T03301
Hydor Hydroset Thermostat Dial | *$39.99 |
 | IceCap 250 Watt Electronic Metal Halide/ HQI Ballast
Brand: IceCap Part Number: IC3161
This ballast will power any metal halide 250W bulb. It does not over-drive the bulb, so output will be at the bulb manufacturer`s specifications. By using a constantly changing, very high frequency, the ballast will light any bulb without flicker. Longer bulb life and other features makes this the best ballast for all metal halide applications.IceCap uses its unique, patented operating system, which allows you to save energy without compromising light output. By applying lower voltage across the lamp, energy consumption is reduced and lamp life is expected to be increased.Advantages: Energy Savings of over 10% from High Efficiency Longer Lamp Life due to constant output Longer Ballast life due to low heat Compact Size to fit most fixtures High Frequency Operation is flicker & noise free Savings on air conditioning costsQuality: Built-in circuit protection High Voltage, High Current Protection High Temperature Shut-Down Improper Wiring Protection Automatic Bulb Failure Shut-Down Automatic Resetting Starts in Cold Temperature Starts in Low Voltage Environments Allows up to 30 feet between Lamp and Ballast | *$141.95 |
 | IceCap 250 Watt Metal Halide Retrofit Kit with 10K German Bulb and SpiderLight Reflector
Brand: IceCap Part Number: ICSPK4
IceCap System with Spider Light Reflector: German 250W 10,000K SetupGerman 250W 10,000K Setup. This retrofit fixtures includes an IceCap ballast (with powercord), mogul socket, mounting bracket, Spider Light Reflector reflector, bulb and a quick-disconnect male connector (lamp cord not included).Spider Light Reflector dimension:Height: 5"Width: 13"Length: 16"The SpiderLight is a State-of-the-Art reflector retrofit kit that gives you the most out of your metal halide lamps. Its unrivaled design virtually eliminates light "re-strike" in the lamp, allowing the arc tube to burn cooler while giving excellent uniform light dispersal over your reef. The nature of the design will allow the typical hobbiest with a six foot tank to burn two lamps and get uniform light distribution over the entire length of the aquarium. The reflector kit includes the reflector, bracket, mogul socket and mounting hardware (Available optionally without socket). This system is compatible with any standard Metal Halide ballast and lamp with a mogul base.Key Features: Computer Designed for optimum light distribution Polished, mirror like finish providing outstanding reflectivity Up to 40% more light reflected into aquarium over standard reflectors Kit easily retrofits into existing canopy For many hobbiests, fewer lamps lamps will be required over aquarium, saving energy and reducing excess heat in the aquarium. | *$287.69 |
| IceCap 250 Watt Metal Halide Retrofit Kit with 14K Hamilton Bulb and SpiderLight Reflector
Brand: IceCap Part Number: ICSPK53
IceCap System with Spider Light Reflector: Hamilton 250W 14000K SetupThis retrofit fixtures includes an IceCap ballast (with powercord), mogul socket, mounting bracket, Spider Light Reflector reflector, bulb and a quick-disconnect male connector (lamp cord not included).Spider Light Reflector dimension:Height: 5"Width: 13"Length: 16"The SpiderLight is a State-of-the-Art reflector retrofit kit that gives you the most out of your metal halide lamps. Its unrivaled design virtually eliminates light "re-strike" in the lamp, allowing the arc tube to burn cooler while giving excellent uniform light dispersal over your reef. The nature of the design will allow the typical hobbiest with a six foot tank to burn two lamps and get uniform light distribution over the entire length of the aquarium. The reflector kit includes the reflector, bracket, mogul socket and mounting hardware (Available optionally without socket). This system is compatible with any standard Metal Halide ballast and lamp with a mogul base.Key Features: Computer Designed for optimum light distribution Polished, mirror like finish providing outstanding reflectivity Up to 40% more light reflected into aquarium over standard reflectors Kit easily retrofits into existing canopy For many hobbiests, fewer lamps lamps will be required over aquarium, saving energy and reducing excess heat in the aquarium. | *$280.34 |
 | IceCap 48 inch VHO Retrofit Kit - 2 Lamps
Brand: IceCap Part Number: ICK482
ICECAP VHO Fluorescent Lighting Systems: 2 LampsThese retrofit kits are great if you want have an existing hood and would like to get into high intensity lighting in a simple, affordable manner. This IceCap retrofit lighting system includes: 1 IceCap 430 ballast Acrylic mounting bracket/plate 2 48" VHO lamps with 180` internal reflector Endcaps Wiring harness with quick disconnectWarranty: 3 years from date of purchase.We normally recommend the following combinations for marine aquariums: 2 lamps: one actinic blue and one actinic white 3 lamps: one actinic blue and two actinic white 4 lamps: two actinic blue and two actinic whiteNote: ">Click here to select the bulbs that come with the retrofit kitImportantShipping Charges for URI Fluorescent Light BulbsWe can pack up to 6 lamps per box. Since fluorescent bulbs require special handling and packaging, please take note of the following: Free shipping applies to the following:24" & 36" bulb orders of 4 or more46.5"72" bulb orders of 6 or more For quantities less than the number required to qualify for free shipping:24" = $10.0036" = $15.0046.5"60" = $20.0072" = $25.00Size: 48"No. of Lamps: 2Wattage: 220W/IC430 | *$236.18 |
 | IceCap T5 Mounting Standoffs - Pair
Brand: IceCap Part Number: IC1733 | *$6.92 |
 | IceCap T5 Water Proof Single Lampholders (Endcaps) - Pair
Brand: IceCap Part Number: IC1731 | *$12.69 |
 | Ich Attack Disease Inhibitor 16oz
Brand: NOVALEK/KORDON Part Number: 39446
Ich Attack treats diseases caused by ich, fungus, protozoans and dinoflagellates. It is safe for use in freshwater, saltwater (including reef and live rock aquariums) and in ornamental ponds. Treats up to 960 gallons. | *$6.70 |
 | Illuminated Acropora Coral Ornament
Brand: Quantum Aquatics Part Number: sp-aqua-acroplit
This mesmerizing illuminated acropora coral ornament is truly unique - perfectly safe and UL rated, it uses an LED light to produce its shimmering undersea glow. Add a touch of the fantastic to your aquarium, or dress it up for those festive occasions. Specifications: 6 1/2" x 3 1/2" x 5 1/4". Low wattage LED: UL rated | *$20.77 |
 | Imagine Betta Bowl
Brand: Imagine Part Number: 12105
Kit contains everything you need to keep your betta happy and in good health. Just add water and fish. Includes plastic drum bowl, plastic plant, gravel, betta food, and chlorine neutralizer. Setting Up Your Betta BowlClean the bowl under running water. Do not use any soap or detergents. Cover the bottom of the bowl with the gravel provided. For decoration, add the plastic plant. Just slide the plant base into the gravel. Carefully fill the bowl to a height of about one inch from the top with tap water of approximately room temperature. Since bettas are tropical fish, you should keep you betta bowl in a room where the temperature does not drop much below 70 degrees (F). Before you put the betta into your bowl, you must make sure that the water is safe. Most tap water contains chlorine, which is very poisonous to fish. To remove it, you can simply let the water age for about two days. The chlorine will disappear naturally. Or you can make the water fish-safe immediately by adding chlorine neutralizer included in this kit. Follow the directions on the packaging carefully. Introducing Your Betta to the BowlAfter you have brought your betta home, keep the plastic bag with the fish in the same room with the betta bowl for at least 20 minutes. This will gradually equalize the temperature of the water in the bag and in the bowl. To transfer the fish from the bag to the bowl, use a net if you have one. Otherwise, pour most of the water, very carefully, from the bag into your sink, le | *$5.25 |
 | IMAGINE GOLD BIO 3 FILTER CARTRIDGE PENGUIN 125 - SINGLE
Brand: Imagine Gold Llc Part Number: IMA71251
Img Bio 3 Cart Penguin 125 1Pk | *$2.68 |
 | IMAGINE GOLD BIO 3 FILTER CARTRIDGE PENGUIN 170/330 4 PACK
Brand: IMAGINE GOLD, LLC Part Number: IMA71704
Img Bio 3 Cart Peng 170/330 4P | *$4.99 |
 | IMAGINE GOLD POWER FILTER WITH SKIMMER 55GAL
Brand: Imagine Gold Llc Part Number: IMA78055
Imagine announces the most significant and innovative breakthrough in aquarium filtration technology.....the BIO System Power Filter -plus- OXY Surface SkimmerPumps 225 GPH for use up to a 55 gallon tank Removes organic film and dust from the water surface Delivers oxygen rich surface water to the filter which enhances the growth of nitrifying bacteriaA special skimmer valve also allows water intake from the middle and bottom of the aquariumProvides complete water circulation and filtrationfor freshwater or marine aquariumsIncludes 4 BIO 3 Filter Cartridges | *$39.82 |
 | Imagine Gold Round Fish Bowl 1/2 Gallon
Brand: Imagine Gold Part Number: 079262232634
Imagine Gold Round Glass Bowl 1/2 Gallon with Neck Tag. High quality round fish bowls made in glass. Measurements are 7" Wide and 6 1/2" Tall. | *$4.71 |
 | Imagine Gold Round Fish Bowl 2 Gallons - RD-4
Brand: IMAGINE GOLD Part Number: 467332
Dimensions (L x W x H):8.75 x 8.75 x 7.75 | *$17.16 |
 | Imagine Gold Squat Fish Bowl 1 Gallon
Brand: Imagine Gold Part Number: 079262000288
Imagine Gold Glass Fish Bowl. High quality squat fish bowls made in glass. We recommend 1 Goldfish per Gallon. This Bowl will hold 1 Goldfish! 1 Gallon Glass Squat Bowl Dimensions: 5.5" Tall x 9.5" Wide - (Foot Base is 5.75") | *$5.50 |
 | Imagine Small Plastic Deluxe Drum Bowl
Brand: Imagine Part Number: 12158
Imagine the possibilities. Add water, decorations, and goldfish and turn these sturdy, transparent plastic bowls into underwater lands of adventure. Accented by black rim. | *$6.74 |
 | Impeller Assembly for Aqua Clear 110 500 Filters
Brand: ROLF C HAGEN Part Number: A638
The Impeller is the only moving part of the Aqua Clear filter. With proper maintenance it will rarely need replaced. This is the replacement Impeller Assembly for Aqua Clear 110 and 500 power filters. | *$12.99 |
 | Impeller Assembly for Aqua Clear 70 300 Filters
Brand: ROLF C HAGEN Part Number: A636
The Impeller is the only moving part of the Aqua Clear filter. With proper maintenance it will rarely need to be replaced. The Aqua Clear 70 replacement impeller is a white, 6 blade assembly with a magnet. | *$9.79 |
 | Impeller Assembly for Aqua Clear 802 Powerheads
Brand: ROLF C HAGEN Part Number: A16930
The replacement, free floating Impeller for the Aqua Clear 70 (formerly 802) Powerhead is for aquariums up to 70 gallons. | *$13.99 |
 | Impeller Assembly for AquaMaster Skilter 250 Filters
Brand: EUGENE G DANNER MFG INC Part Number: 11855
Replacement impeller assembly for the Supreme Skilter 250. | *$4.99 |
 | Impeller Assembly for Eclipse 2 Hood
Brand: TETRA HOLDINGS, INC Part Number: PR3088
Replacement impeller assembly for the PFE-2 filter by Marineland. | *$6.99 |
 | Impeller Assembly for Eclipse 3 Hood
Brand: TETRA HOLDINGS, INC Part Number: PR3089
Replacement Impeller Assembly for the PFE-3 by Marineland. | *$9.06 |
 | Impeller Assembly for Eheim 1048 Water Pump
Brand: HAWAIIAN MARINE IMPORTS Part Number: 7645980
The Eheim 1048 Impeller includes the shaft and bushings. | *$4.99 |
 | Impeller Assembly for Emperor 280 Filter
Brand: AQUARIA INC (MARINELAND) Part Number: PR2126
Replacement Impeller Assembly for the Emperor 280 by Marineland. | *$9.39 |
