250 Watt 13000K Metal Halide Bulb - Aqualine AB, Double Ended Brand: Aqua Medic Part Number: 014694809432 250W 13000K METAL HALIDE DOUBLE ENDED BULBAQUALINEThe AquaLine double-ended metal halide bulb offers excellent coloration and intensity. The crisp-white color will illuminate your tank nicely. It is very similar to an Ushio 13,000K bulb but slightly more blue.  Actinic supplementation may be used to create a bluer look. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. It must also be housed inside a pendant. It cannot be used with simply a reflector in an open application as UV rays emitted by the bulb must first be filtered with a UV-proof lens. An excellent choice for nano-reefs and other reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extingu
*$109.86
250 Watt 13000K Metal Halide Bulb - MegaChrome Marine, Double Ended Brand: Giesemann Part Number: 4029941005116 We offer a wide variety of Metal Halide bulb choices to suit your aquarium lighting needs.Most of the MH bulbs in the same wattage format can be interchanged. However, please contact us to make sure.The K at the end of color rating for each bulb stands for Kelvin. This is a measurement of the color temperature. The higher the Kelvin rating, the cooler (bluer) the color of light given off by the bulb. In general, the color given off by the 10,000K German is interpreted as being a perfect white color.NOTE: Double ended bulbs should always be used with the UV shield (supplied with most pendants). You and your corals can suffer from excess UV radiation otherwise. The bulb should be handled carefully as well since it has no outer glass casing. Using soft gloves is a good idea to keep finger prints off bulb. This is during installation and replacement. The average life expectancy is 12 months.
*$114.65
250 Watt 13000K Metal Halide Bulb - Megachrome Marine, Mogul Base Brand: Giesemann Part Number: 4029941005123 We offer a wide variety of Metal Halide bulb choices to suit your aquarium lighting needs.Most of the MH bulbs in the same wattage format can be interchanged. However, please contact us to make sure.The K at the end of color rating for each bulb stands for Kelvin. This is a measurement of the color temperature. The higher the Kelvin rating, the cooler (bluer) the color of light given off by the bulb. In general, the color given off by the 10,000K German is interpreted as being a perfect white color.NOTE: Double ended bulbs should always be used with the UV shield (supplied with most pendants). You and your corals can suffer from excess UV radiation otherwise. The bulb should be handled carefully as well since it has no outer glass casing. Using soft gloves is a good idea to keep finger prints off bulb. This is during installation and replacement. The average life expectancy is 12 months.
*$131.03
250 Watt 13000K Metal Halide German Bulb - Aqualine, Mogul Base Brand: Aqua Medic Part Number: 807846762518 250W 10000K METAL HALIDE SINGLE ENDED BULBAQUALINEThe AquaLine single-ended metal halide bulb offers excellent coloration and intensity. The crisp-white color will illuminate your tank nicely. It is very similar to an Ushio 10,000K bulb but slightly more blue.  Actinic supplementation may be used to create a bluer look. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. An excellent choice for nano-reefs and other reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by
*$109.86
250 Watt 14000K Metal Halide Bulb - AquaMaxx, Double Ended Brand: Denkyu Lighting Part Number: MB6662 250W 14000K METAL HALIDE DOUBLE ENDED BULBAQUAMAXXThe AquaMaxx Mogul Based 14000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An excellent choice for reef tanks 24" or deeper.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running a ballast off a circuit from another part of the house. Do I need a cover shield between the lamp and the aquarium?Metal halide lamps produce a large amount of UV and also have a potential of exploding. The single ended metal halide lamps have an outer ja
*$73.49
250 Watt 14000K Metal Halide Bulb - AquaMaxx, Mogul Base Brand: Denkyu Lighting Part Number: MB6616 250W 14000K METAL HALIDE MOGUL BASED BULBAQUAMAXXThe AquaMaxx Mogul Based 14000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An excellent choice for reef tanks 24" or deeper.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running a ballast off a circuit from another part of the house. Do I need a cover shield between the lamp and the aquarium?Metal halide lamps produce a large amount of UV and also have a potential of exploding. The single ended metal halide lamps have an outer jac
*$68.25
250 Watt 14000K Metal Halide Bulb - Blue Life SPS (South Pacific Sunlight), Double-Ended Brand: Blue Life USA Part Number: 858542001753 Benefits:South Pacific Sunlight (SPS) Metal Halide bulbs are designed to replicate the beautiful shimmering light of your fish and coral`s natural environment. These bulbs are specifically engineered to enhance the polyp extension, color, and growth of your corals. Unlike some other bulbs, SPS Metal Halide bulbs are manufactured with built-in igniters (starters) that allow them to be used with any type of ballast.SPS Metal Halide bulbs are ideal for most Acroporas (SPS), Anemones, Clams, Hard Corals (LPS), Leathers, Mushrooms, Polyps, Soft Corals, and Xenia.Available in 175 watt, 250 watt & 400 watt In your choice of:Crisp Blue10,000k representing 10-30 Ocean Depth Feet (ODF)Mid Sea Blue14,000k representing 30-60 Ocean Depth Feet (ODF)Deep Sea Blue20,000k representing 60-90 Ocean Depth Feet (ODF)Important:Do not touch bulb glass with fingers. As with all Metal Halide bulbs, oils from your hands may create hot spots that can cause damage. Hold bulb glass with cardboard bulb sleeve, latex glove, or a clean towel. It is recommended that you replace this or any other Metal Halide Bulb once every 9-12 months depending on ballast and bulb intensity. This will keep the ecosystem vibrant and healthy.Care:Salt and dust can hamper the efficiency of your bulb, occasional cleaning is recommended. For cleaning, allow bulb to cool thoroughly, and then remove from socket using a cloth or paper towel. Hold metal end, and then wipe glass and metal with alcohol applied with a paper towel. Allow bulb to dry before operating.
*$69.95
250 Watt 14000K Metal Halide Bulb - Blue Life SPS (South Pacific Sunlight), Mogul Base Brand: Blue Life USA Part Number: 858542001487 Benefits:South Pacific Sunlight (SPS) Metal Halide bulbs are designed to replicate the beautiful shimmering light of your fish and coral`s natural environment. These bulbs are specifically engineered to enhance the polyp extension, color, and growth of your corals. Unlike some other bulbs, SPS Metal Halide bulbs are manufactured with built-in igniters (starters) that allow them to be used with any type of ballast.SPS Metal Halide bulbs are ideal for most Acroporas (SPS), Anemones, Clams, Hard Corals (LPS), Leathers, Mushrooms, Polyps, Soft Corals, and Xenia.Available in 175 watt, 250 watt & 400 watt In your choice of:Crisp Blue10,000k representing 10-30 Ocean Depth Feet (ODF)Mid Sea Blue14,000k representing 30-60 Ocean Depth Feet (ODF)Deep Sea Blue20,000k representing 60-90 Ocean Depth Feet (ODF)Important:Do not touch bulb glass with fingers. As with all Metal Halide bulbs, oils from your hands may create hot spots that can cause damage. Hold bulb glass with cardboard bulb sleeve, latex glove, or a clean towel. It is recommended that you replace this or any other Metal Halide Bulb once every 9-12 months depending on ballast and bulb intensity. This will keep the ecosystem vibrant and healthy.Care:Salt and dust can hamper the efficiency of your bulb, occasional cleaning is recommended. For cleaning, allow bulb to cool thoroughly, and then remove from socket using a cloth or paper towel. Hold metal end, and then wipe glass and metal with alcohol applied with a paper towel. Allow bulb to dry before operating.
*$86.30
250 Watt 14000K Metal Halide Bulb - Current USA Powerpaq, Double-Ended Brand: Current USA Part Number: 842959020797 The Right PeakPowerPaq lamps represent a new level in illumination, emitting the high intensity and crisp color rendition your corals crave. These lamps are manufactured with precision, which deliver consistent halide temperatures and higher maintained light output over the life of the lamp. Each lamp is put through vigorous testing and quality control which includes a burn-in process to stretch the filament and ensure proper wavelength emission.Believe Your EyesPowerPaq lamps deliver a whole new world of brightness and illumination. Our engineers have created the ultimate rapid start halides with a special igniter and higher gas fill pressure. The result is full brightness and quick re-strike in 50% less time. This combination also produces more lumens per watt and longer lamp life.Twice As BrightWhen coupled with Currents proprietary electronic driving system, PowerPaq lamps produce the highest lumen per watt of any comparable HID lamp. High lumen output means not only significant energy savings - it means your corals will grow faster and stay healthier.Specifications: Model: 2079 Watts: 250 Color Temperature: 14000K Base Type: DE ANSI: M80 Ballast: HQI
*$65.51
250 Watt 14000K Metal Halide Bulb - Hamilton, Double Ended Brand: Hamilton Part Number: MB6665 250W 14000K METAL HALIDE DOUBLE ENDED BULBHAMILTONThe double-ended 14000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. It must also be housed inside a pendant. It cannot be used with simply a reflector in an open application as UV rays emitted by the bulb must first be filtered with a UV-proof lens. An excellent choice for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires a
*$76.43
250 Watt 14000K Metal Halide Bulb - Hamilton, Mogul Base Brand: Hamilton Part Number: MB6615 250W 14000K METAL HALIDE SINGLE ENDED BULBHAMILTONThe Hamilton single-ended 14000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. This bulb will work with a standard magnetic ballast, magnetic pulse-start ballast or electronic ballast. An excellent choice for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running a ballast off a circuit from another part of the house. Do I need a cover shield between the lamp and the aquarium?Metal hali
*$92.81
250 Watt 14000K Metal Halide Bulb - Iwasaki, Double Ended Brand: Iwasaki Part Number: MB6661 10,000K to 50,000K range of high color temperatures with an excellent spectral balance of Iwasaki chemistry developed for aquarium lighting Up to 96 CRI insures that indoor nature scapes look as beautiful as if they were outdoors. Reliable long life & stable color are achieved through EYE/Iwasaki`s unique Metal Halide technology and commitment to quality. All lamps are operated & inspected before leaving the factory, maximizing performance and reliability.Applications: Aquariums Coral growth Fountain lighting Waterscapes Terrariums Pools Plant growth
*$109.19
250 Watt 14000K Metal Halide Bulb - Phoenix, Double-Ended Brand: Phoenix Part Number: MB6664 This 250W 14000K bulb casts a crisp-white light with a blue tint. Great for bringing out the coloration of fish and corals while providing sufficient intensity for growth. An HQI, Pulse-Start or Electronic ballast is required. This bulb is offered at an excellent price and is a very good choice for reef tanks 22"30" deep. 14,000K Color Temperature Made in Japan Excellent with or without actinic supplementation Operate on a HQI metal halide ballast, pulse-start ballast or electronic ballast
*$73.48
250 Watt 14000K Metal Halide Bulb - Ushio, Double Ended Brand: Ushio Part Number: MB6663 250W 14000K METAL HALIDE DOUBLE ENDED BULBUSHIOUshio double-ended 14000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. It must also be housed inside a pendant. It cannot be used with simply a reflector in an open application as UV rays emitted by the bulb must first be filtered with a UV-proof lens. An excellent choice for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then eith
*$76.43
250 Watt 14500K Metal Halide Bulb - Megachrome Coral, Double Ended Brand: Giesemann Part Number: 4029941005154 We offer a wide variety of Metal Halide bulb choices to suit your aquarium lighting needs.Most of the MH bulbs in the same wattage format can be interchanged. However, please contact us to make sure.The K at the end of color rating for each bulb stands for Kelvin. This is a measurement of the color temperature. The higher the Kelvin rating, the cooler (bluer) the color of light given off by the bulb. In general, the color given off by the 10,000K German is interpreted as being a perfect white color.NOTE: Double ended bulbs should always be used with the UV shield (supplied with most pendants). You and your corals can suffer from excess UV radiation otherwise. The bulb should be handled carefully as well since it has no outer glass casing. Using soft gloves is a good idea to keep finger prints off bulb. This is during installation and replacement. The average life expectancy is 12 months.
*$120.11
250 Watt 15000K Metal Halide Bulb - XM, Double-Ended Brand: XM Lighting Part Number: MB6763 The XM 250W double-ended metal halide bulb offers good coloration and intensity. The color is between an 10,000K bulb and a 20,000K bulb: white with a distinct blue tint. This bulb will work with standard magnetic ballast, magnetic pulse-start ballast, magnetic HQI ballast or electronic IceCap ballasts. An excellent choice for nano-reefs and other reef tanks 22"30" deep. 15,000K Color Temperature Excellent with or without actinic supplementation Operate on a HQI metal halide ballast or electronic ballastPlease click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running a ballastoff a circuit from another part of the house. Do I need a cover shield between the lamp and the aquarium?Metal halide lamp
*$82.95
250 Watt 15000K Metal Halide Bulb - XM, Mogul Base Brand: XM Lighting Part Number: MB6713 The XM single-ended metal halide bulb offers good coloration and intensity. The color is between an 10,000K bulb and a 20,000K bulb: white with a distinct blue tint. This bulb will work with a standard magnetic ballast or an electronic ballast. An excellent choice for nano-reefs and other reef tanks 22"30" deep. 15,000K Color Temperature Excellent with or without actinic supplementation Operate on a standard metal halide ballast or electronic ballast Standard Mogul basePlease click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running a ballastoff a circuit from another part of the house. Do I need a cover shield between the lamp and the aquarium?Metal halide lamps produce a large amount of U
*$72.45
250 Watt 20000K Metal Halide Bulb - Aqualine AB, Double Ended Brand: Aqua Medic Part Number: 014694809739 250W 20000K METAL HALIDE DOUBLE ENDED BULBAQUALINEThis German-made Aqualine double-ended 20000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. It must also be housed inside a pendant. It cannot be used with simply a reflector in an open application as UV rays emitted by the bulb must first be filtered with a UV-proof lens. The bulb will burn more white on an HQI ballast and more blue on electronic or pulse-start ballasts. An excellent choice for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabi
*$131.03
250 Watt 20000K Metal Halide Bulb - Blue Life SPS (South Pacific Sunlight), Double-Ended Brand: Blue Life USA Part Number: 858542001760 Benefits:South Pacific Sunlight (SPS) Metal Halide bulbs are designed to replicate the beautiful shimmering light of your fish and coral`s natural environment. These bulbs are specifically engineered to enhance the polyp extension, color, and growth of your corals. Unlike some other bulbs, SPS Metal Halide bulbs are manufactured with built-in igniters (starters) that allow them to be used with any type of ballast.SPS Metal Halide bulbs are ideal for most Acroporas (SPS), Anemones, Clams, Hard Corals (LPS), Leathers, Mushrooms, Polyps, Soft Corals, and Xenia.Available in 175 watt, 250 watt & 400 watt In your choice of:Crisp Blue10,000k representing 10-30 Ocean Depth Feet (ODF)Mid Sea Blue14,000k representing 30-60 Ocean Depth Feet (ODF)Deep Sea Blue20,000k representing 60-90 Ocean Depth Feet (ODF)Important:Do not touch bulb glass with fingers. As with all Metal Halide bulbs, oils from your hands may create hot spots that can cause damage. Hold bulb glass with cardboard bulb sleeve, latex glove, or a clean towel. It is recommended that you replace this or any other Metal Halide Bulb once every 9-12 months depending on ballast and bulb intensity. This will keep the ecosystem vibrant and healthy.Care:Salt and dust can hamper the efficiency of your bulb, occasional cleaning is recommended. For cleaning, allow bulb to cool thoroughly, and then remove from socket using a cloth or paper towel. Hold metal end, and then wipe glass and metal with alcohol applied with a paper towel. Allow bulb to dry before operating.
*$86.30
250 Watt 20000K Metal Halide Bulb - Blue Life SPS (South Pacific Sunlight), Mogul Base Brand: Blue Life USA Part Number: 858542001494 Benefits:South Pacific Sunlight (SPS) Metal Halide bulbs are designed to replicate the beautiful shimmering light of your fish and coral`s natural environment. These bulbs are specifically engineered to enhance the polyp extension, color, and growth of your corals. Unlike some other bulbs, SPS Metal Halide bulbs are manufactured with built-in igniters (starters) that allow them to be used with any type of ballast.SPS Metal Halide bulbs are ideal for most Acroporas (SPS), Anemones, Clams, Hard Corals (LPS), Leathers, Mushrooms, Polyps, Soft Corals, and Xenia.Available in 175 watt, 250 watt & 400 watt In your choice of:Crisp Blue10,000k representing 10-30 Ocean Depth Feet (ODF)Mid Sea Blue14,000k representing 30-60 Ocean Depth Feet (ODF)Deep Sea Blue20,000k representing 60-90 Ocean Depth Feet (ODF)Important:Do not touch bulb glass with fingers. As with all Metal Halide bulbs, oils from your hands may create hot spots that can cause damage. Hold bulb glass with cardboard bulb sleeve, latex glove, or a clean towel. It is recommended that you replace this or any other Metal Halide Bulb once every 9-12 months depending on ballast and bulb intensity. This will keep the ecosystem vibrant and healthy.Care:Salt and dust can hamper the efficiency of your bulb, occasional cleaning is recommended. For cleaning, allow bulb to cool thoroughly, and then remove from socket using a cloth or paper towel. Hold metal end, and then wipe glass and metal with alcohol applied with a paper towel. Allow bulb to dry before operating.
*$86.30
250 Watt 20000K Metal Halide Bulb - German Radium, Mogul Base Brand: Radium Part Number: 4008597116254 250W 20000K METAL HALIDE SINGLE ENDED BULBRADIUMThe German-made Radium 20000K metal halide bulb offers excellent coloration and good intensity. It is crisp-white with a strong blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. This bulb is white with a blue tint on a magnetic HQI ballast. It will burn more blue on an electronic ballast or pulse-start ballast. An excellent choice for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not
*$98.27
250 Watt 20000K Metal Halide Bulb - Megachrome Blue, Double Ended Brand: Giesemann Part Number: 4029941005222 We offer a wide variety of Metal Halide bulb choices to suit your aquarium lighting needs.Most of the MH bulbs in the same wattage format can be interchanged. However, please contact us to make sure.The K at the end of color rating for each bulb stands for Kelvin. This is a measurement of the color temperature. The higher the Kelvin rating, the cooler (bluer) the color of light given off by the bulb. In general, the color given off by the 10,000K German is interpreted as being a perfect white color.NOTE: Double ended bulbs should always be used with the UV shield (supplied). Your corals can suffer from excess UV radiation otherwise. The bulb should be handled carefully as well since it has no outer glass casing. Using soft gloves is a good idea to keep finger prints off bulb. This is during installation and replacement. The average life of a double ended bulb is 12-18 months.
*$120.11
250 Watt 20000K Metal Halide Bulb - XM, Mogul Base Brand: XM Lighting Part Number: MB6813 250W 20000K METAL HALIDE SINGLE ENDED BULBXMThe XM 20000K metal halide bulb offers excellent coloration and average intensity. It is crisp-white with a strong blue tint. It brings out the fluorescent pigments in corals nicely. Fluorescent supplementation is usually not necessary, but can be used for added intensity and to simulate dawn and dusk. An electronic ballast, magnetic pulse-start ballast or magnetic HQI ballast is required to ignite this bulb. This bulb is white with a blue tint on a magnetic HQI ballast. It will burn more blue on an electronic ballast or pulse-start ballast. An excellent choice for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arctube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough p
*$72.45
250 Watt 20000K+ Metal Halide Bulb - Ushio, Double Ended Brand: Ushio Part Number: MB6867 We offer a wide variety of Metal Halide bulb choices to suit your aquarium lighting needs.A Metal Halide Lamp is a high-intensity discharge light source in which the light is produced by the radiation from mercury, plus halides of metals such as sodium, scandium, indium, and dysprosium. The K at the end of color rating for each bulb stands for Kelvin. This is a measurement of the color temperature. The higher the Kelvin rating, the cooler (bluer) the color of light given off by the bulb. In general, the color given off by the 10,000K German is interpreted as being a perfect white color. Please click here for more information on how the different Kelvin ratings appear.There are two main considerations to decide upon when chosing Metal Halide bulbs and systems: wattage and color temperature. There are generally two considerations when planning wattage, tank depth and the requirements of various types of corals. Tanks 18" and shorter will, typically, use 175 or 250 watt MH bulbs. Typically, tanks 24" and over will use 400 watt MH bulbs. I have found most soft and large-polyped-stony corals to do just fine within 5-15 inches from a 175 watt bulb and 10-24 inches from a 400 watt bulb. Most small-polyped-stony corals survive within 5-10 inches from a 175 watt but appear to thrive within 5-15 inches of 250 and 400 watt bulbs. These are all just general statements to assist in going the correct route with chosing wattage. They are not absolute truths. Color temperature is a hotly debated topic where there is no one recommendation that will fit everybody. Lowers Kelvin temperatures are yellower and greener colors while higher Kelvin temperatures are whiter and bluer colors. There are two factors that determine most hobbysts choice of bulb colors, par rating and aesthetics. The 6500K Iwasaki bulb is generally re
*$80.84
250 Watt 22000K Metal Halide Bulb - Megachrome Blue, Mogul Base Brand: Giesemann Part Number: MB6914 MEGACHROME bluea blue spectrum light with a temperature of more than 21.000 Kelvin which radiates actinic blue light to highlight the blue and green colours of your corals.You can use this bulb in combination with the MEGACHROME marine or coral bulbs in order to emphasise the blue colours of the whole aquarium.MEGACHROME blue is ideal for representing lighting levels at night-time or if you want to simulate the phases of the moon.colour temperature: over 21.000 Kelvinavailable in 150 and 250 Watt double ended, and 250 and 400 Watt single ended (mogul E40)
*$120.11
250 Watt 5500K Metal Halide Bulb, Mogul Base Brand: Venture Part Number: MB6111 250W 5500K METAL HALIDE SINGLE ENDED BULBThe 5500K metal halide bulb is a full-spectrum Daylight bulb. It offers excellent light intensity, but will be slight yellow-green in coloration. A great bulb to achieve fast growth. Actinic supplementation is recommended to add more intensity in the blue spectrum and to simulate dusk/dawn. This bulb will work with a standard magnetic ballast or an electronic ballast. This 250W bulb is great for reef tanks 22"-30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.As a general rule of thumb, use one metal halide bulb for 24" of tank length. Most of the Metal Halide bulbs in the same wattage format can be interchanged. However, please contact us to make sure. Metal Halide bulbs are one the most difficult aspects of the hobby to recommend. Most of the information here is general.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and ca
*$56.48
250 Watt 6500K Metal Halide Bulb - Iwasaki, Mogul Base Brand: Iwasaki Part Number: MB6211 250W 6500K MH BULBIWASAKIThe Iwasaki 6500K metal halide bulb is a full-spectrum Daylight bulb. It offers excellent light intensity, but will be slight yellow-green in coloration. A great bulb to achieve fast growth. This bulb will work with a standard magnetic ballast, magnetic EYE ballast or electronic ballast.This 250W bulb is great for reef tanks 22"30" deep.Please click here for more information on how the different Kelvin ratings appear and more information on metal halide bulbs.As a general rule of thumb, use one metal halide bulb for 24" of tank length. Most of the Metal Halide bulbs in the same wattage format can be interchanged. However, please contact us to make sure. Metal Halide bulbs are one the most difficult aspects of the hobby to recommend. Most of the information here is general.Common questions/problems concerning metal halide lamps: Metal halide lamps of the same kind are different colors?Metal halide lamps operate by passing an electric arc through an arc tube that excites particles in the arc tube. When the metal particles reach an excited state they emit energy in the form of visible light. It takes 100 hours of operation before the metal particles stabilize and become a consistent color. All metal halides require 100 hours of operation before color and light output stabilize. All metal halides inherently have a slight color variation between individual lamps. The metal halide lamp fires and then either burns dull or the arc extinguishes?Usually the ballast and lamp are not receiving enough power. Metal halides pull a high current. Usually the problem is either there is too great a load on the circuit or the extension cords are of a small wire size and can`t handle the power needed by the ballast. Use only heavy duty extension cords and try running
250 Watt Metal Halide Unassembled ballast + Mogul Socket Brand: House Brand Part Number: MHUB250 250 Watt MH Unassembled Ballast + Mogul Socket. Due to the weight of this product there is an additional shipping charge in addition to normal shipping charges.
25060 16In Inc Full Hood Blk Brand: Perfecto Manufacturing Part Number: 25060 Designed to sit on top of the aquarium frame, perfect-a-lite-full hoods accommodate aquariums from multiple mfrs. The front access panel runs the entire length of the hood for daily maintenance and feeding. Textured surfaces won t show fingerprints.
25875 Impeller Assembly Pfc Brand: United Pet Group Part Number: 25875 Replacement magnet Impeller for Whisper 20 and C.
*$4.40
25gal Deep Ocean Sea Salt (6pc) Brand: Deep Ocean Aqua Salt Marine Deep_Ocean by Deep Ocean - Get Fast Shipping and Low Prices at PetsWarehouse.com on over 43,000 Pet Supplies such as Dog Food, Dog Supplies, Cat Food, Cat Supplies, Bird Food, Bird Supplies, Aquarium Supplies and Fish Supplies. We offer our customers the largest selection of Pet Supplies online in the world, when we say "everything for your pet" it's true, we have it. Customer satisfaction guaranteed!
2ft IceCap T5 2-Lamp Complete Retrofit Kit (with ballast and reflectors) Brand: IceCap Part Number: IC1511 2 Pairs T5 Endcaps2 Pairs T5 Standoffs2 Sets T5 Reflector Clips1 Power Cord (tinned)3 Orange Wire Nuts (bagged)1 IceCap 660 Electronic Fluorescent BallastIce Cap Ballasts are the coolest ballasts available using 40% less electricity and burning 40% brighter. Their unique circuitry prevents premature lamp burn out and fading associated with VHO lamps. You can run VHO, HO, and STD lamps in any combination. In summary, the Icecap 660 is a versatile and powerful ballast. IceCap Model 660 is the most versatile and powerful ballast.Specific features include: Unsurpassed Versatility - A Model 660 can operate up to 16 lamp feet with a total of 464 rated lamp watts. Individual lamps can be 2 through 6 feet each. This corresponds to 12 different lamp configurations. Maximum light output with VHO and HO lamps. Cold temperature starts to -40 degrees Celsius
2MDQ-SC Water Pump Brand: LITTLE GIANT Part Number: 580506 This magnetic drive pump is designed to operate more quietly for freshwater and saltwater aquariums. It has a ceramic impeller shaft and thermally protected motor. UL and CSA listed. This is a pressure applicable pump.
*$149.99
2MDQX-SC Water Pump Brand: LITTLE GIANT Part Number: 580507 This magnetic drive pump is for aquarium use. It is quiet running with a very low heat exchange. Good for freshwater and saltwater aquarium. Operate in-line only. This pump cannot be submersed. For circulation only. Needs oiled every 6 months with SAE 20 oil. It is UL and CSA listed.
*$124.99
2MDSC Water Pump Brand: LITTLE GIANT Part Number: 580503 Thermally protected pump with open fan cooled motor with ball bearings. Safe for freshwater or saltwater aquariums. For external use only. It is leak proof and seal-less. Requires oiling every 6 months. It is UL and CSA listed.
*$150.26
2` x 2` Aluminum Reflector Only Brand: Captive Purity Part Number: CP5751 2` x 2` Aluminum Reflector (mirrored finish). Reflector only, mogul socket, etc. not included.
