 | Fluke Corporation TL220 Industrial Test Lead Kit
Brand: Fluke Model: FLUTL220 Part Number: TL220
* Starter kit for industrial applications * Includes one pair each (red and black) of AC220, TP220 and TL222 * 1000 volt CAT III, 600 volt CAT IV, 10 amps | *$46.80 |
 | Fluke Corporation TL75 Hard Point Test Lead Set
Brand: Fluke Model: FLUTL75 Part Number: FLUTL75
- Comfort grip probes with PVC-insulated leads- Extra hard probe tips to provide long service life- Double insulated with internal strain-relief- Test lead lenght with probe: 54"- Current rating: 10A- Recommended for use with Fluke AC70A Alligator Clips | *$16.66 |
 | Fluke H5 Electrical Tester Holster, Lightweight
Brand: Fluke Part Number: H5
Electrical Tester Holster (Fluke T3/T5) Rugged fabric holster includes flap for lead storage and built-in belt loop Fits Fluke T3 and T5 testers One year warranty | *$23.13 |
 | Fluke I1010-Kit,AC/DC Current Clamp Kit, 600A AC, 1000A DC
Brand: Fluke Model: i1010-KIT Part Number: i1010-KIT
Special value kit for electrical professional who is looking to add on DC and AC current measurement capabilities to their DMM. Includes a roomy carry case to hold and protect your meter and current clamp, plus extra storage for your test leads, probes and manuals. Included with kit: i1010 1-600A AC rms, 1-1000A DC Current Clamp Zippered vinyl carry case with moveable divider Fluke Current clamps are the ideal tools to extend the current ranges of Fluke tools. Battery-powered Hall-effect probe measures 1 A to 1000 A 1mV/Amp output guarantees easy reading on your meter Take accurate current readings without breaking the circuit Specifications: Measurement type: Hall sensor Nominal current range: 600 A, AC 1000 A, DC Continuous current range: 1 A - 600 A, AC, 1 A - 1000 A, DC Maximum Non-Destructive Current: 1000 A Lowest measurable current: 0.5 A Basic accuracy: 2% + 0.5 A (% reading + floorspec) Useable frequency: DC - 10 kHz Output level(s): 1 mV/A Zero error adjustment Safety Specifications Safety CAT III, 600 V Maximum voltage 600 V Mechanical & General Specifications Warranty: 1 year Battery Life: 9 V, 60 hours Maximum conductor diameter: 30 mm 2 x 25 mm Output cable length: 1.6 m Shrouded banana plugs included | *$179.99 |
 | Fluke i200 Current Clamp, 200A, 40 Hz To 10 kHz
Brand: Fluke Part Number: I200
Fluke Current clamps are the ideal tools to extend the current ranges of Multimeters. The i200 is a single range 200A AC current clamp with current output via safety shrouded banana plugs. The i200 is compatible with most Fluke multimeters or any other current measurement device that accepts shrouded banana plugs. Features: Companion to a DMM to measure up to 200 A AC 1mA per Amp output garantuees easy reading on you meter Take accurate current readings without breaking the circuit Max. conductor diameter: 20 mm CAT III 600V safety rating Frequency Response: 40 Hz. to 40 Hz. 10MV/A, 100MV/A Maximum Conductor Diagonal: 0.8" Specifications Nominal current range: 200 A Continuous current range: 0.5 A - 200 A Maximum Non-Destructive Current: 240 A Lowest measurable current: 0.5 A Basic accuracy: 1% + 0.5 A (48-65 Hz) (% reading + floorspec) Useable frequency: 40 Hz - 10 kHz Output level(s): 1 mA/A Safety Specifications Safety: CAT III, 600 V Maximum voltage: 600 V AC Mechanical & General Specifications Warranty: 1 year Maximum conductor diameter: 20 mm Maximum conductor size (busbar): 20 x 5 mm Output cable length: 1.5 m Shrouded banana plugs: Yes | *$110.00 |
 | Fluke MICROMAPPER ( MT-8200-49A )
Brand: Fluke Model: MT-8200-49A Part Number: MT-8200-49A
MICROMAPPER | *$113.37 |
 | Fluke MINI HAT LIGHT Product ID: L205
Brand: Fluke
MINI HAT LIGHT | *$20.35 |
 | Fluke Networks Deluxe Butt Set, Angled Bed-Of-Nails, TS42
Brand: Fluke Part Number: 42801009
Model: TS®42DLX Just The Facts: Extended range High-impedance DataSafe® operation in Monitor Mode Low/high voltage High-Impedance DataSafe® Operation DSL/POTS filtering technology Low/High Voltage Indication Low current (mA) indication Two-way speakerphone for true hands-free conversations Amplified speaker for hands free monitoring Waterproof - exceeds American Military Spec. MIL-STD-810E* PBX pause button(4 seconds nominal) Replaceable 9V battery for powering speaker Speed Dial Memory: 9 numbers, 18 digits DropSafe® tested to 20' Angled Bed of Nails | *$329.65 |
 | Fluke Polyester Carrying Case, Blk/Yel, Replaces 374TE0880
Brand: Fluke
Two padded pockets protects two test tools such. Durable polyester 600D case construction for long life. Compatible with Fluke 20, 70, 11X, 170 Series digital multimeters. One Year Warranty. | *$22.83 |
 | Fluke PV350 Pressure Vacuum Module, >500 psi, For DMM's
Brand: Fluke Model: PV350 Part Number: FLK-PV350
Compatible with all Fluke and most popular DMMs Digital pressure and vacuum measurements in a single module Transducer sealed in 316 stainless steel compatible with variety of liquids and gases Measures vacuum to 76 cm Hg Displays results in English (psig of Hg) or metric (kPa or cm Hg) units Measures pressure to 3447 kPa (500 psig) One year warranty | *$265.79 |
 | Fluke SINGLE INPUT THERMOMETER, 60HZ NOISE REJECTION Product ID: FLUKE-51-2
Brand: Fluke
SINGLE INPUT THERMOMETER, 60HZ NOISE REJECTION | *$199.80 |
 | Fluke T+PRO Electrical Tester
Brand: Fluke Part Number: TPlusPRO
Backlit LCD Display; Display resolution of 0.1 V, ideal for Troubleshooting low-voltage lighting; Resistance (Ohms) to 9.99 kOhms; Rotary Field Indication; Display Hold for easier viewing in Hard to test areas --- The T+ and T+ Pro electrical testers have all the advantages of traditional solenoid testers, with none of the typical drawbacks. The T+ series use all 3 voltage detection methods - light, sound, and vibration, to work more efficiently in noisy environments, dimly lit areas, or tight spaces. Built-in flashlight, GFCI trip capability, and the legendary ruggedness you expect from Fluke, make these an excellent choice for most residential, commercial, and industrial applications. The Fluke T+PRO is the choice for the demanding commercial and industrial electrician. This full-featured electrical tester includes voltage and continuity measurement, a Rotary Field Indicator, resistance, and a digital display with 0.1 V resolution. The Fluke T+ is the basic electrical tester for residential electricians and HVAC technicians, who need a durable, reliable tool for testing voltage and continuity. --- GFCI Trip; On/Off switchable beeper, selectable according to your environment; Compliant with latest NFPA 70E recommendations; 3 forms of ac/dc voltage detection: light, sound, and vibration for added user protection and convenience --- INCLUDES: 1 - Set of Test leads and Probes; 2 - AAA Batteries; 1 - Test lead strap for managing leads | *$79.95 |
 | Fluke T5-1000USA,Electic Tester 1000V,Continuity,
Brand: Fluke Part Number: T5-1000
Your Fluke T5 Electrical Testers lets you check voltage, continuity and current with one compact tool. All you do is select volts, ohms, or current and the tester does the rest. Features: measures volts AC and DC, displays resistance to 1000 Ω, OpenJaw™ current measurement up to 100A, detachable Slim-Reach™ probe tips, and a continuity beeper. The T5 is available in 600V and 1000V models. Two-Year Warranty. Automatically measures volts ac and volts dc with precise digital resolution Displays resistance to 1000 Ω Easy and accurate OpenJaw™ current measurement Continuity beeper Compact design with neat probe storage Rugged enough to withstand a 10-foot (3m) drop Detachable SlimReach™ probe tips are customized for national electrical standards Test leads accept Fluke accessory test clips Can stay connected much longer than solenoid type tester Auto off mode to conserve battery life Specifications: Continuity beeper: Threshold: On at <25 Ω, off at >400 Ω Volts indicator LED: Threshold: Guaranteed on by 30VAC T5-1000: Cat III 1000V, Cat IV 600V | *$120.00 |
 | Fluke T5-H5-1AC KIT/US, 1000V Voltage, Continuity and Current Electrical Tester with H5 and 1AC
Brand: Fluke Model: T5-H5-1AC Kit/US Part Number: T5-H5-1AC
T5-1000 USA ELEC TEST,H5 HOLSTER,FLUKE-1AC-II KIT | *$160.95 |
 | Fluke TEST LEAD SET,TELECOM 5-WAY Product ID: TL26A
Brand: Fluke
TEST LEAD SET,TELECOM 5-WAY | *$38.99 |
 | Fluke TL223 Electrical Test Lead Set, AC220, TP1, TL224
Brand: Fluke Model: TL223 Part Number: TL223
Handy all-in-one kit that includes: AC220 SureGrip Alligator Clip Set TP1 Slim-ReachT Test Probes (flat bladed) TL224 SureGripT Silicone Test Lead Set (straight to right) One year warranty | *$56.81 |
 | Fluke TL238 SureGrip Test Lead Set for High Energy Environments
Brand: Fluke Model: TL238 Part Number: TL238
An accessory kit especially designed for working in high energy environments. The SureGrip Test Probe has only 4 mm of exposed metal at the tip. Test probes with less exposed metal help reduce the risk of inadvertent shorts between each other and other metal surfaces that could result in an arc flash explosion. Probe extenders fit between modular test leads and test probes, increasing the distance between you and a live circuit by 20.5 cm (8"). | *$56.21 |
 | Fluke TL71 Premium Test Lead Set, Insulated, Comfort Grip
Brand: Fluke Model: TL71 Part Number: TL71
L71 Premium Test Lead Set One pair (red, black) comfort grip probes with silicone insulated, right-angle test leads 48" Recommended for µV measurements CAT IV 600 V, CAT III 1000 V, 10 A rating UL listed One year warranty | *$18.45 |
 | Fluke TL75 63" 48" Hardpoint Test Lead Set
Brand: Fluke
Low cost, general purpose test leads. Super strong tips and integral strain relief provide extended service life. Safety-shrouded, right-angled inputs. Standard on all DMM models (except 88). | *$15.70 |
 | Fluke TL80A Basic Test Lead Set, Silicone, 600V, 1m OAL
Brand: Fluke Model: TL80A Part Number: TL80A
TL80A Basic Electronic Test Lead Kit One pair (red, black) each 1 meter long silicone test lead set, alligator clip and probe tip extender. C75 soft carrying case CAT II 300 V. UL listed One year warranty (USA) | *$44.99 |
 | Fluke TL910 Electronic Test Probe 5 Sets Replacement Tips
Brand: Fluke Part Number: TL910
TL910 Electronic Test Probes Very small 1 mm tips to access hard to reach test points Probe tip length up to 100 mm, test lead length: 1 m Includes: 3 sets of spring loaded gold tips and 2 sets of stainless steel tips CAT IV 600 V, CAT III 1000 V, 3 A rating One year warranty | *$48.63 |
 | Fluke TL940 Multi-Stacking Mini-Hook Lead, Banana Plug
Brand: Fluke Part Number: TL940
TL940 Multistacking Banana plug to Mini-hook Mini-Hooks attach to component leads up to 0.060" dia 36" PVC insulated leads 30VRMS, 60VDC, 5A Red and Black | *$18.53 |
 | Fluke TLK-220 Accssory Kit, SureGrip, Clips, Probes, Leads
Brand: Fluke Part Number: TLK220
Special value SureGrip Set for industrial applications. Includes two sizes of alligator clips and sharp test probes for reliable connections, test leads and a roomy carry case to hold and protect your meter and all your accessories. All 1000 V CAT III, 600 V CAT IV rated. Included with set: AC220 Plunger Style Alligator Clips AC285 Large Jaw Alligator Clips TP220 Sharp Test Probes TL224 Right to Straight Test Leads Zippered Vinyl Carry Case with Moveable Divider | *$112.51 |
 | Fluke TLK-225 Accessory Kit, SureGrip, 2 Each of 6 Items
Brand: Fluke Part Number: TLK-225
A great addition to any DMM! Kit includes all the SureGripâ„¢ leads and probes in a handy roll-up pouch: AC220 SureGripâ„¢ Alligator Clip Set AC280 SureGripâ„¢ Hook Clip Set AC283 SureGripâ„¢ Pincer Clip Set AC285 SureGripâ„¢ Large Jaw Alligator Clip Set TP220 SureGripâ„¢ Test Probe Set TL224 SureGripâ„¢ Silicone Test Lead Set 6-Pocket Storage Pouch USA | *$112.51 |
 | Fluke TP1 Slim Reach Test Probe, Flat, TL221/222/224/27
Brand: Fluke Part Number: TP-1
One pair (red, black) of slender probe bodies for probing closely spaced or recessed terminals Hard stainless steel probe tips Flat blade design to hold securely in blade type electrical wall sockets. CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | *$13.89 |
| | Fluke TP82, Insulation Piercing Probes For Probe Tips
Brand: Fluke Part Number: TP82
Benefits: For use with 12 V or 42 V vehicles; Use it on fuel injectors or sensors while providing complete insulation to grounding due to design; User controls the needle depth to minimize insulation damage; User can tighten/loosen clamp while still connected to the test lead | *$39.79 |
 | Fluke VISUAL FAULT LOCATOR ( VISIFAULT )
Brand: Fluke Model: VISIFAULT Part Number: VISIFAULT
Lets you perform simple end-to-end continuity checks., and precisely locates fiber breaks, pinches and bends. Illuminates fiber breaks, damaged connectors on patch cords, defective splices in splice trays, and tight fiber bends in and around equipment racks. The choice of a continuous wave output mode for steady fault illumination or a flashing output mode makes for easier fault location. Specs: Fiber compatibility: Multimode and Singlemode Wavelength: 650 nm (visible wavelength) Laser safety rating: Class II Output power: 1.0mW max. Output modes: Continuous (steady) and flashing (2.3 Hz pulsed) Range: 3 km multimode, 4 km singlemode Operating temperature 0°C to 40°C Storage temperature: -20°C to 60°C Relative humidity: 95% (10 to 35°C) Vibration: Random, 2g, 5-500 Hz Shock: 1m drop onto all corners and face Altitude: 3000m Dimensions: 157mm x 52mm x 37mm (6.2" x 2.0" x 1.3") Weight: 0.18kg (5.7 oz.) Optional adapter cap: tethered protective cap Controls: On/Off, continuous/flashing Battery: two AA Battery life: >40 hours in continuous mode Carrying case: Soft side with belt loop. | *$262.99 |
| | Fluke VOLT LIGHT Must be ordered in multiples of 12 Product ID: LVD1
Brand: Fluke
VOLT LIGHT Must be ordered in multiples of 12 | *$24.94 |
 | Fluke-334A 600 Amp AC Digital Clamp Meter with backlight
Brand: Fluke Model: Fluke-334A Part Number: 334A
Take a new look at current measurement - Fluke 334 - Large display with backlight, measures ac amps, ac/dc volts, ohms and motor start-up current With the striking design of the Fluke 330 Series, we've taken a new look at the way you make current measurements and at how you use your tools, and how to get the results you need, faster and more conveniently. The result is a new, ergonomic concept, shaped to fit your hand and to access tight spots easily. The series feature a large display that is backlit -on most models- so readings can be taken in virtually any lighting situation. Auto-shut-off maximizes battery life so the meter works when you need it. A choice of five models gives you the right functions for your measurements. Specifications Model: Fluke-334A AC Amps Range: 0-600A AC Amps Accuracy: 2% +/- 3 Counts (50-60 Hz) AC Amps Response: Averaging Inrush Integration Time: 100 mS AC Voltage Range: 0-600V DC Voltage Range: 0-600V Ohms Range: 0-600 Ohms, 601-6000 Ohms Continuity: Three-Year Warranty. | *$163.50 |
 | Flush Mount Door Chime
Brand: Nutone Part Number: LA-14WH (OLD LB-14WH)
This door chime features a recessed design for a unobstrusive look. The white grill can be painted to match the surrounding decor. A two-note chime is activated by the front entrance while a single-note chime is activated by a second entrance. Inset body dimensions are 4-7/8 inches wide by 7 inches tall by 1-7/8 inches deep. Requires a 16-volt transformer, item [21005]. | *$49.95 |
 | Foot Switch With AC Variable Speed Control, 6 amps max, 125 volts Dayton # 5KX07
Brand: Dayton Part Number: 5KX07 | *$55.18 |
 | FOREIGN ADAPTER KIT - VM3 Dual wattage converter for use with 50 watt and 1600 watt devices
Brand: Simran Model: VM3 - Worldwide Adapter k
Provides for your foreign electrical travelling needs in most foreign countries. This kit is for domestic appliances whose rating is 50 watts 1600 watts. 50 watts is designed for answering machine devices, tape recorders, calculators, cassettes, radios, etc. 1600 watts is designed for some heating-type appliances such as curlers, irons, heating pads, electric blankets, steamers, food/bottle warmers, etc. | *$18.99 |
 | Four Gang Toggle Switch Plate, Almond
Brand: Cooper Wiring Devices Model: 2154A-BOX Part Number: 2154A-BOX
Molded from non-flammable thermoset. Flush fitting, warp resistant design. Matching screws provided. High gloss finish is soil resistant. | *$1.27 |
 | Four Outlet Power Block Strip
Brand: Woods Industries Model: 832177 Part Number: 832177
Metal multiple outlet strip. Rated 15 amp, 125 volts and 1875 watts. UL listed. Three conductor 4' cord. | *$7.90 |
 | FRANK LLOYD WRIGHT Designer Gift WILLITS Wood Light Switch SWITCHPLATE COVER
Brand: Uniart
Frank Lloyd Wright Willits Etched Alder Wood Single Switch Plate Cover. Will look great in any room in your home. Officially licensed by the Frank Lloyd Wright Foundation, which insures you are purchasing an item of the finest quality. | *$19.99 |
 | Franzus Adapter Plug
Brand: Franzus Model: NW1C Part Number: NW-1C-1
Adapter plug for Europe, Middle East, parts of Africa, Asia, & the Carribean | *$2.48 |
 | Franzus TS-2000 Dual Hi 2000 Watt Converter
Brand: Conair Model: TS-2000 Part Number: TS-2000
<li>Converts 220V foreign electricity to 110V for use overseas on most U.S. appliances rated 0-2000 watts. <p><li>Convenient high/low wattage selector switch. <p><li>Low setting (0-25 watts) for electric shavers, radios, curling irons, etc. <p><li>High setting (26-2000 watts) for appliances such as irons, steamers, some hair dryers, etc. <p><li>Includes a drawstring pouch. | *$18.19 |
 | Franzus TS-237AP-1 All-In-One Adapter Plug with Surge Protection
Brand: Franzus Part Number: TS-237AP
The 4 most common adapter plug configurations are all conveniently housed in a compact, easy-to-use single piece unit with safety shutters, power light and a built-in surge protector that keeps your appliances safe from spikes in the flow of foreign electricity. This amazing plug also accepts grounded and nongrounded, polarized and nonpolarized plugs from dozens of countries (Europe, Middle East, Asia, Caribbean, Australia, New Zealand, Fiji, China, North/South America, Japan, U.K., Ireland and parts of Africa, Hong Kong and Singapore). It also accommodates European appliances used in the U.S. Includes travel pouch. | *$10.99 |
 | Fruit Food - Watermelon - Light Switch Covers - 2 plug outlet cover
Brand: 3dRose LLC Part Number: lsp_1160_6
Watermelon Light Switch Cover is new and handcrafted utilizing unique process resulting in a stunning high gloss ceramic-like finish. <b>SET OF MATCHING SCREWS IS INCLUDED </b> giving it a perfect finishing touch. Made of durable metal material. | *$13.95 |
 | Fruit Food - Wine Bread Cheese Grapes - Light Switch Covers - 2 plug outlet cover
Brand: 3dRose LLC Part Number: lsp_871_6
Wine Bread Cheese Grapes Light Switch Cover is new and handcrafted utilizing unique process resulting in a stunning high gloss ceramic-like finish. <b>SET OF MATCHING SCREWS IS INCLUDED </b> giving it a perfect finishing touch. Made of durable metal material. | *$13.95 |
 | Full Spectrum EasyEye Natural Light Floor Lamp 27Watt
Brand: SPT Model: SL-820 Part Number: SL820
Flicker-free, bright white light duplicates natural lighting, which contributes to an overall sense of health and well being. Soothing natural light minimizes glare and eyestrain and increases contrast and clarity. 27 watt energy efficiency light bulb is equivalent to an ordinary 150 watts bulb and lasts 5 times longer. Efficient compact fluorescent lamp (Off-Shelf) is controlled by an IC chip originated from Japan, which produces a flicker-free frequency of 25,000Hz | *$63.95 |
 | Furman PST-6 Power Station 6-Outlet Surge Strip
Brand: Furman Model: PST-6 Part Number: PST-6
For over 30 years, Furman has pioneered the development of AC power products for the most demanding audio, video, and broadcast professionals. With Furman's Power Station Series, everyone can reap the benefits of unrivaled power purification and unequalled surge protection. Today's overworked, outdated power grid delivers poor quality AC power. When connecting sensitive equipment to regular power outlets, AC noise masks and distorts critical signal information which cripples performance. This is why it's more important than ever to purify or clean the AC powering your sensitive audio/video equipment. *Outlets: PST-6: Six (filtered) *Current rating: 15 amps *Dimensions: PST-6: 2.75" H x 3.375" W x 13.5" D. | *$57.99 |
 | FURMAN SS-6B SS-6B PRO SURGE SUPRESSOR
Brand: Furman Part Number: SS-6B
6-OUTLET BLOCK EMI/RFI NOISE ATTENUATION HEAVY-DUTY METAL CONSTRUCTION ILLUMINATED ON/OFF SWITCH CIRCUIT BREAKER 15-FT POWER CORD | *$24.95 |
 | Furnace Draft Inducer Blower (Goodman J238-112-11064) 115 Volts Fasco # A157
Brand: Fasco Part Number: A157
Cross Reference Information: 7002-2307, 7002-2771, 7002-3219, 7002-3162, B1859005, 4MH09, R7-RFB185 | *$109.95 |
 | Furnace Draft Inducer Blower (Goodman, Clare) 115 Volts Fasco # A140
Brand: Fasco Part Number: A140
Cross Reference Information 7021-9087, 7021-9000, 7021-9915, 7021-10279, 4246100, 54-3, 73-3, 4MH09, B2833001S, B28330-01 | *$121.95 |
 | Furnace Draft Inducer Blower (Heat N Glow) 115 Volts Fasco # A133
Brand: Fasco Part Number: A133
Cross Reference Information: Heat-n-Glow 7002-1241 | *$90.50 |
 | Furnace Draft Inducer Blower (Heil Quaker 610672) 115 Volts Fasco # A064
Brand: Fasco Part Number: A064
Cross Reference Information: Heil Quaker 610672, 7021-5043, 7021-7102, HQ610672, 1006168. CLICK ON "see More Pictures" for dimensional drawing of unit. | *$92.95 |
 | Furnace Draft Inducer Blower (Intercity 7021-10299) 115 Volts Fasco # A170
Brand: Fasco Part Number: A170
Cross Reference Information: 1010526, 1010928, 1011095, 1011097, 1011-409, 1010928, 1011095, 1011097, 1011-409, 1164280, 7021-8918, 7021-9362, 7021-9594, 7021-9935, 7021-9936 | *$172.97 |
 | Furnace Draft Inducer Blower (Intercity) 115 Volts Fasco # A134
Brand: Fasco Part Number: A134
Cross Reference Information: 101324, 1708-607P, 1010975, 7021-9335, 7021-8735, 7021-9499, 7021-8736, 7021-7700, 7021-9477, 1010238P, 7021-9918, R7-RFB134, 7021-10275, 4MH28 | *$97.95 |
 | Furnace Draft Inducer Blower (Lennox 7021-9450) 115 Volts Fasco # A163
Brand: Fasco Part Number: A163
Cross Reference Information: 7021-9450, 7021-10302, 7021-10721, 67K0401, FB-RFB547 | *$156.00 |
|
