 | "Watt's Up" RC Watt Meter & Power Analyzer WU100 Version 2 --- SALE!
Brand: Tenergy Model: WU100 Part Number: WU100
# Specifications:
# Voltage 0-60 V, resolution 0.01 V. That's a 14 cell series li-poly pack!
# Current 0-100 A peak, 50 A continuous, resolution 0.01 A
# Charge 0-65 Ah, resolution 0.001 Ah. That's ~32 Amps for two hours!
# Power 0-6500 W, resolution 0.1 W. That's ~8.7 Horsepower!
# Energy 0-6500 Wh, resolution 0.1 Wh.
# Operates from 4.0-60 V, 0 V with optional receiver battery pack
# 16 x 2 STN LCD display
# Powerful, 8 MIPS micro-controller
# Color: Electric blue or green
Applications:
Specially designed for RC Battery Packs to help you:
# Set speed control cutoff voltages and currents
# Tune performance by comparing different setups of pro-peller, motor, gearing, speed control and battery
# Measure a full battery charge and compare to spec when charger claims done
# Check peak currents are safe for battery, speed control, motor, wiring and connectors
# Predict airplane flight time based on ACTUAL conditions in your model
# Check battery capacity and health and whether battery should be retired
# Verify that the minimum voltage under load is within specifications
# Check for wiring and connector power losses.
# Measure power and energy consumption of ANY device with a rechargeable battery pack, such as
# Airsoft gun battery pack
# Bike lighting battery pack
# E-bike and Scooter battery pack
# Combine the power analyzer together with our 2.4V - 7.2V, 7.2V - 12V, 24V NiMH universal smart chargers , and with 3.6V - 14.8V Li-Ion battery charger It is perfect tool to monitor battery pack's performance
Note: In order measure the capacity of battery pack in charging condition, the battery pack must be discharged fully before measureing. For the battery pack stored for longer time, you need 3 - 5 cycle's charging and discharging to get full capacity.
We don't suggest you to use the meter to judge battery nominal capacity, becuase usually nomimal capacity is measured by IEC standard at 0.1C charging and discharging current. | *$57.15 |
 | (Red & Yellow) Cube World Series 1: Dodger and Whip (Red & Yellow)
Brand: Radica Part Number: 060523C
Play with one or build a world with Cube World Series. They'll play, visit and interact with one another. You can play games and pester them, tilt the cube and an interactive motion sensor will cause the stick men to fall on their side and upside down. Stack them for an interactive block party. Measures 1.83" x 1.83" x 1.83". | *$18.99 |
 | (~BLUE~) Fisher Price Kid Tough Fp3 Player with (~BLUE~) Case & Speakers
Brand: Fisher Price Model: K3680 | *$110.00 |
 | - DEMOLITION DERBY
Brand: Bluw Model: B00J1037 Part Number: B00J1037
These remote controlled stock cars turn
your living room into a demolition derby!
The aim is to eject your opponents
passengers by driving into the targets
on the side of their car - First one to dispatch them all wins! | *$33.20 |
 | 1 Black Main Rotor Set (1 Upper + 1 Lower Rotor Blades) For Micro Mosquito & FireFly RC Helicopters
Brand: Interactive Toy Part Number: BR-MM-ROTORSET
This is a replacement main rotor shaft for the Firefly or Micro Mosquito helicopter. Instructions for removal the old shaft: 1. Remove the main rotors 2. Remove the two small motor gears (pinions) by prying them off with a small flat screwdriver, making note of which one goes on which side 3. Slide the upper large main gear off of the shaft 4. Remove the C-clip that holds the old shaft in at the bottom by pulling the black plastic tab 5. Pull the shaft assembly up and out, or press it through from the bottom 6. Turn the shaft upside down and brace the tip on a hard surface 7. Pressing at the center, push the remaining large gear down the shaft, and remove it 8. Slide the sleeve and washer off of the old shaft 9. Pull the end cap off the shaft, you may need to hold the shaft with pliers (this may damage the shaft, so only use pliers on the old one) Installation instructions: 1. Press the end cap onto the bottom of the new shaft (the end that does not have a flat spot on the side) 2. Slide the washer and sleeve onto the shaft 3. Slide the lower main gear onto the shaft, aligning the "D" shaped hole with the "D" shaped top of the shaft 4. Brace the bottom of the shaft on a hard surface, and push the gear down until it almost touches the sleeve (there should be a room for the sleeve to move up and down a tiny bit, but not more than 1/32") 5. The shaft can now be inserted into the body of the helicopter. 6. Clip the C-clip onto the bottom of the sleeve where it protrudes through the bottom of the helicopter 7. Slide the upper large gear onto the shaft 8. Replace your pinion gears (the left pinion gear should mesh with the lower main gear, right pinion gear should mesh with the upper main gear) 9. Replace the rotors (lower rotor first with the notches down, meshing with the notches on the upper main gear, the spacers, the upper rotor, and the rubber capping tube) | *$19.95 |
 | 1-2-3 Treehouse - V.Smile SmartVille Imaginative Play
Brand: V.Smile Model: 80-69700 Part Number: 069700
Your child will climb to a new level of learning with the 1-2-3 Treehouse. While other playsets lay the groundwork for imaginative play, this dynamic smart set branches out beyond the ordinary with its superior technology and endless learning opportunities. The 14 "Smart Parts" teach and talk when placed in key hot spots throughout the colorful play set. Your child will learn numbers with a hopscotch game, colors and nursery rhymes with the light-up buttons, and shapes with a fun 4-piece shape sorter. Requires 3 "AA" batteries required, not included. | *$36.54 |
 | 1.3 Megapixel Spy Camera Sunglasses
Brand: ThinkGeek Model: 9A0F3 Part Number: 9A0F3
We all remember seeing those incredible ads for x-ray specs in the back of comic books and some of us probably even mailed in the $3 to a PO Box in New Jersey for rush delivery. "Surprise your friends with amazing x-ray vision" the ads would read. Yeah, someone is going to be surprised but it's not going to be your friends. <br>
<br>
These camera sunglasses certainly aren't x-ray specs, but they do capture 1.3 megapixel still images (at a resolution of 1280x1024). The included RF remote-control is ideal for easy, stealth-style photo shooting. High-quality lightweight frame material and UV400 polarized flip-up lens. A polymer li-ion rechargeable battery provides a battery life of up to 9 hours (shooting 1 photo/minute). USB 2.0 interface via a standard Mini USB port for data upload and download & re-charging the battery. <br>
<br>
The sunglasses also allow you to enjoy your music via built-in MP3 playback. Built-in earbuds provide super convenient listen capability and can be hookd out of the way when not in use. <br>
<br>
* 1GB of storage (can hold thousands of photos) <br>
* Plays MP3s and takes 1.3 Megapixel digital photos <br>
* Embedded ear buds for MP3 playback <br>
* Remote control for taking photos
RF remote frequency: 2.4GHz
Li-ion rechargeable battery (3.7V, 240mAh) <br>
* USB 2.0 connection for transferring files and re-charging the battery <br>
* Control buttons for Vol +/-, Fwd, Rwd, Play, Pause, Capture <br>
* Includes: sunglasses, remote w/ strap, USB cable, storage case, cleaning cloth, extra clear lenses <br> | *$79.99 |
 | 1.3 Megapixel Water-resistant Camera with Flash
Brand: Jazz Model: JDC38W Part Number: JDC38W
1.3 MP, Digital Flash Camera, Waterproof Up To 9', Rugged Outer Protective Seal, Digital Still Camera, PC Camera, Video Recording, 8 MB Internal Memory, Self Timer, Mini LCD, USB Port. | *$26.99 |
 | 1/10 Pro Pulls (12 Pro Pulls and 20 Body Clips)
Brand: Pro-line Racing Part Number: PRO605001
This is the Pro Pulls for 1/10 scale Cars by ProLine. / / FEATURES: Made from durable rubber for lasting performance / Pro pulls attach to the body clips so then the body clips are / easier to remove from the mounting posts / / INCLUDES: Twelve Pro Pulls / Twenty body clips / / SPECS: Pro pulls: 0.4 x 0.71"" (10 x 18mm) / Body clips: 0.35 x 1.02"" (09 x 26mm) / / tlw 9/13/07 / ir/jxs | *$8.06 |
 | 1/10 SCALE REMOTE CONTROL OFFROAD MONSTER TRUCK
Brand: Remote Controlled Part Number: 62375Y
Antenna
Battery Pack Charger (120V)
9.6V Battery Pack (29.95 Value)
Wireless Radio Control Transmitter | *$56.16 |
 | 1/16 Scale Remote Control German Panther Tank Shoots Smokes
Brand: Remote Control Model: 69301 Part Number: 69301
Authorized OEM Factory for Marui RC Tank - Original English Menu Instruction Book! - All driving wheels suspension system - 7 ways movement - Main Cannon fires 6mm BB up to 25 meter range - 320 degrees turret rotation - 2-level forward speed control Radio-controlled BATTLE TANK. Max firing range of about 25M Equipped with motor AIR GUN. Turret can turn to both sides and gun can go up and down. 1/16 Scale of Tank length make vivid tank battle Possible. 2-Level Forward Speed Control. Forward, Backward, Spin, Super Spin. Equipped with High Gripping Caterpillar. Tank Fighting Possible (More than one Tank can run at the Same Time. Running Time as long as over 60 minutes. - Max. firing range of motor gun: appr.25m (with hop-up system) - Gun Shell: 6mm BB Shell - Load of Shells: appr. 40 Shells - Max. Side turnign angle of turrent L/R: appr 320' - Max. Vertical Turning Angle of Gun (up/down): appr. 20' - Max. Climbing Gradient (changeble on rough surfaces): appr.35' - Full Length:530mm - Full Width: 232mm - Full Height: 188mm - 3 Frequencies (27MHz,40MHz,49MHz)and 9 bands for change. Smoke coming out from the back when driving. | *$78.95 |
 | 1/24 Carrera Analog Slot Car Race Track Sets - "Ultimat
Brand: Carrera Model: 200 201 10 Part Number: 170.411.6
Cars with front (Xenon) and rear lightingAnother great home race track set by Carrera!Cars:Audi R10 Winner Mans 2006Porsche RS Spyder ALMS 2006 N 7Contents: 11 standard straights1 connecting straight8 curves 1/602 controllers1 transformer 18 V/2x1,5AOuter edge strip for curvesInterior edge strip for curvesEdge strip plugsRoadway bolting devicesGuard railsRoadway supportsTrack Area: 10 ft x 5.2 ftTrack Length: 21.6 ft (6.60 m )Total Weight (Packing Weight) (Pounds): 28Box Dimensions: Length: 27" Girth: 66" Length Plus Girth: 93" | *$199.99 |
 | 1/5 Baja 5b RTR
Brand: Hobby Products International Part Number: 10600
<p>Buggy fans can expect big things from HPI’s giant new off-road Baja 5B RTR. At nearly 32 inches, this big dog can go where more timid 4-wheelers can’t. It’ll go for more than 30 minutes without refueling, and its innovative 8mm aluminum alloy chassis ensures extreme durability.</p> | *$999.99 |
 | 100-240V AC to 12VDC, 1.5 Amp Power Supply
Brand: E-flite Part Number: EFLC4000
AC to 12VDC 1.5 Amp Power Supply | *$19.99 |
 | 1001 Monster Things to Spot (1001 Things to Spot)
Brand: Usborne Books Part Number: 520915
Have you ever heard a scufflebump under your bed? Or has a scaremonger made you jump out of your skin? In this book, you can find and count all kinds of strange monsters, and discover what they get up to when no one's looking. Perfect for ages 6 and up. 31 pages. Size of book: 9 1/8 x 10 5/8 inches. Pages: 32. | *$6.46 |
 | 101 Dalmatians Storytime Theater 4.5" Cartridge (BEFORE ORDERING PLEASE CONFIRM THAT YOUR PROJECTOR WILL ACCEPT THIS SIZE CARTRIDGE)
Brand: Storytime Model: DT31405 Part Number: 31405
Cartridge is approx 4.5" wide ~ Will not fit with the newer Projectors that only accept small cartridges | *$19.94 |
 | 11.1V 800mAh 15C Li-Poly Lipo 3 Cell Battery Pack for RC airplane helicopter
Brand: Tenergy Model: 15C11.1V800 Part Number: 15C11.1V800
Features and Benefits
* Continuous Discharge Rate: 15C / 12A
* Burst Discharge Rate: 20 C / 16A
* Discharge (Output) Leads: 16 AWG silicon wire, 95 mm long
* Charging (Balancing) Lead: JST/Align/E-Flite connector. 24AWG PVC wire, 60mm Long
* Dimension: 55 x 30 x 15 mm
* Weight: 39g / 1.3 oz
* Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.
Note: Please read instructions before using! | *$20.42 |
 | 11.1V 800mAh 3S LiPo, JST/Bal: BCP, BCPP EFLB0995
Brand: E-flite Part Number: EFLB0995
11.1V 800mAh 3S Lipo JST/Bal: BCP BCPP | *$37.99 |
 | 11.1volt 1800mAh 25C Li-Poly Lipo Battery Pack for RC airplane helicopter
Brand: Tenergy Model: 3S-1800-25C Part Number: 3S-1800-25C
Features and Benefits
Continuous Discharge Rate: 25C / 45A
Burst Discharge Rate: 50C / 90A
Discharge (Output) Leads: 14 AWG silicon wire, 90 mm long, no connector
Charging (Balancing) Lead: TP Style 4-pin connector. 24AWG PVC wire, 36 mm Long
Dimension: 103x 36x 20 mm
Weight: 157g / 5.6oz
Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.
Note: Please read instructions before using! | *$47.50 |
 | 11.1volt 2000mAh 15C Li-Poly Battery Pack for RC airplane helicopter
Brand: Tenergy Model: 3S-2000-15C Part Number: 3S-2000-15C
Features and Benefits
* 3 cell Lithium Polymer 2000mAh battery pack.
* 15C continuous discharge rate of 30 amps with 40 amp bursts in accordance with our "Real Flight Rating" method.
* Maximum charge rate 1.5 Amps.
* With Align Balance Connecor
* Dimensions: 34mm x 19mm x 100mm
* Weight: 0.35lbs
* This pack is ideal for 8.4V,9.6V 10.8V mini airsoft gun and RC airplane helicopter
* Please see our "Real Flight Rating" method that describes more specific use of "burst" discharge rates with our Li-Poly cells.
* Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell. | *$29.99 |
 | 11A 6V Battery:Angle Pro
Brand: Hangar 9 Part Number: HAN197
11A 6V Battery:Angle Pro | *$2.99 |
 | 12 AWG Multi Stranded Silicone Wire 2 feet Red and 2 feet Black
Brand: Maxx Part Number: K-DF-WIRE-12AWG-RDBK2FT
2 feet of Black and two ft of Red 12AWG (12GA) silicone multi-stranded RC noodle wire. With its flexible silicone coating, this is the ultimate 12 AWG wire for high power electric rc applications and charging batteries. It is so flexible, it feels like a wet noodle! This wire uses only the highest grade of copper and pure silicone insulation provide maximum power and easy soldering. Our Silicone Wire is available in two colors, Red and Black, and guages from 12 to 20. When wiring your rc electronics Black is usually used to connect negative leads, and Red to connect positive leads. Black and Red 12 AWG Silicone Wire Specs Color: Red and Black Size: 12 Gauge (12AWG) Black Length: 2ft (60 cm) Red Length: 2ft (60 cm) Wire Material: Copper Insulator: Silicone | *$7.49 |
 | 12 Prepared Micro-Slides With 36 Assorted Specimens
Brand: Science Tech Model: EDU-36729 Part Number: edu36729
(12) Slides with 36 Assorted Specimens Combination of PE061 & PE062 * (6) Slides with 18 Assorted Specimens (Drinks, Plastic, Synthetic Fibers, Grasshopper, Medicine & Starch) * (6) Slides with 18 Assorted Specimens (Micro-Film, Natural Fibers, Animals, Algae, Vitamin & Fungi) * Ages 8+ * Also Known as PE112 or 36729 * Click on the picture to get a closer look at what is included. | *$12.89 |
 | 12-inch Time Timer
Brand: TIME-TIMER Part Number: TT#2
This visual timer is used to solve time perception problems at all ages and ability levels. A graphic clock face gives the child visual understanding of time elapsing. This is perfect for timed activities and for getting ready. The Timer is purely visual and when the colored portion elapses, time is up. It runs on battery operated quartz movement and can be free standing or hung on a wall. | *$39.00 |
 | 12V 300mA Charger for 6.0V - 9.6V Batteries with Standard Female Tamiya Connector
Brand: Tenergy Model: 12vSC300C Part Number: 12vSC300C
Features and Benefits
* Compact Battery Pack Charger with LED
* Input: AC 110V, Wall Plug
* Output: DC 12V, 300mA charge.
* Built in Standard Female Tamiya connector
* Reliable 12V DC Power Supply
* Charges 6.0-9.6V NiMH and NiCd Battery Pack
* Individual white box packed. | *$9.50 |
 | 12V 600mAh Battery Charger
Brand: Hangar 9 Part Number: HAN103
12V 600mAh Battery Charger | *$10.95 |
 | 12V 7Ah Battery/Charger Combo
Brand: Hangar 9 Part Number: HAN19
<b>12V Battery & Charger</b> Combine a no-leak, rechargeable 7Ah battery (HAN102)Â and a top quality AC charger (HAN103), and you've got the perfect 12V power source. Charger features bright LED-charging indicator that lets you know that it's functioning properly, and comes with long leads and insulated alligator clips. Compact 12V 7Ah Sealed Battery is rechargeable and features maintenance-free, reliable no-leak design. | *$29.95 |
 | 14 Foot Tiki Party Lights
Brand: Rubies Part Number: 24996
Our Tiki Party Lights are great for any room of the house. Has 10 lights with Tiki faces. The 14 foot end to end plug accomodates a maximum of 3 strands of light. Includes a steady burning or flashing option. Our strand will stay lit even if one bulb burns out. Each package contains ten plastic covers and two extra bulbs. UL listed for indoor use. | *$8.99 |
 | 14.8volt 1300mAh 25C Li-Poly Lipo Battery Pack for RC airplane helicopter
Brand: Tenergy Model: 4S-1300-25C Part Number: 4S-1300-25C
Features and Benefits
* Continuous Discharge Rate: 25C / 32.5A
* Burst Discharge Rate: 50C / 65A
* Discharge (Output) Leads: 15 AWG silicon wire, 85 mm long, No connector
* Charging (Balancing) Lead: TP Style 6-pin connector. 24AWG PVC wire, 40 mm Long
* Dimension: 84 x 24.5 x 23.4 mm
* Weight: 146g / 5.1 oz
* Recommend to use Cell Shield (for 2-6 Series connected packs) or LiPo Shield (for 1-12 series connected packs) to prevent the packs from over discharge. A group of paralleled cells can be treated as one single cell.
Note: Please read instructions before using! | *$56.00 |
 | 15A Power Pole Connectors (4 Black, 4 Red) Anderson-Sermos
Brand: Anderson Part Number: PP-15A
PowerPole connectors (formerly known as Sermos connectors) from Anderson Power Products have been very popular with electric airplanes and sailplanes. They were the first low-resistance connectors - made of silver-plated copper. The secret of their success is the stainless steel leaf spring built into the plastic housing. This spring applies 25 lb of pressure onto the contacts, ensuring good, vibration-proof contact. Contact resistance has been measured at 600 micro-ohms. PowerPoles are genderless, which means any connector can be plugged into any other connector. Electric fliers will have to exercise caution when using a speed controller (however, they are color coded). There is one distinct advantage to these connectors: if you have two packs you can use them separately and still plug them together in series. Also, these connectors link together side-by-side using keys that are molded into the side of the housings. When linked together, they become polarised! PowerPole connectors are very easy to use (we recommend soldering), compact, will handle moderate current, and are insulated but not polarised unless you slide them together in pairs. These are 15 Amp connectors, suitable for wiring up to 13ga. This item includes: 4 black plastic housing, 4 red plastic housings, and 8 pins. | *$8.95 |
 | 1956 Ford F-100:TMX, EMX, Savage, Revo
Brand: Pro-line Racing Part Number: PRO324600
"This is the Pro-Line '56 Ford F-100 Truck Body for use / with the Traxxas T/E/2.5-Maxx, Savage and Revo 2.5 Trucks. / / FEATURES: Made of durable .060"" (1.52mm) thick lexan plastic / Perfect fit and porportions for the T/E-Maxx | *$25.49 |
 | 1969 Dodge Charger Body, Clear: S25, TMX. SAVX
Brand: Hobby Products International Model: 7184 Part Number: 7184
This is the clear '69 Dodge Charger body for the HPI Savage HPIC1832, HPIC1845, and the Traxxas T-Maxx (TRAC54**). FEATURES: Lexan construction Dodge Charger 2dr hardtop body with supercharger molded into hood Highly detailed body lines and cut lines INCLUDES: One HPI clear '69 Dodge Charger body One rear tail light section One blower scoop/air intake w/mounting screws and double-sided tape Head and tail light and body trim decal sheet Window masks Instruction sheet REQUIRES: Body scissors to cut out the body (can use DTXR1150) Polycarbonate paint SPECS: Length: 20"" (507mm) Width: 7"" (178mm) Height: 4-1/4"" (108mm) Wheelbase: 12"" (305mm) NNA 7/26/04 ir/jxs | *$22.99 |
 | 1972 Chevy C10 Pick-up :ST,NST,NR,NRU
Brand: Pro-line Racing Model: PRO325100 Part Number: PRO325100
This is the 1/10 scale Proline '72 Chevy C-10 Pick-Up Truck Body for use / with the Stampede and Traxxas Nitro/Electric Trucks. / / FEATURES: Made of lexan plastic / Protective film over body to prevent damage-remove after painting / Includes window mask and decal sheet for trimming in stock or custom / appearance / / INCLUDES: One 1/10 scale Proline '72 Chevy C-10 Pick-Up truck body / Decal sheet with decals for two grilles (stock and custom) / _ Window mask sheet / / REQUIRES: Polycarbonate paint for painting the inside of the body. The color / choice is up to the modeler / Body Scissors (DTXR1150) / Body Reamer (DTXR1157) / / SPECS: Length: 15"" (381mm) / Width: 6"" (152.4mm) / Height: 5"" (127mm) / / tlw 9/7/07 / ir/jxs | *$21.03 |
 | 1:10 Scale Nitro Gas 4WD Engine Powered Radio Control Car
Brand: Hobby Mega
Full Function 4WD Radio Control Car;
2 Speed Transmission;
4 Wheel Drive;
Pull Start;
No-Flex Chassis;
Aluminum Upper Plate and Chassis;
Oil Filled Shocks;
Front Universal Joint Shaft;
High Traction Radial Tires;
Front and Rear Bearing Differentials;
Digital Proportional Speed Control;
Speed: Up to 40mph;
Length: 16";
Width:9.8";
Height:6.6";
Scale: 1:10 | *$174.99 |
 | 1:14 Scale Radio Control Tractor Truck
Brand: Hobby Mega
Full Function Radio Controlled
Working Headlights & Fog lights
Speed: Approx. 10 mph
Scale: 1:14
Forward, Reverse, Stop, Right, and Left
Trigger Pistol Shape Controller
Glossy Exterior Paint
Factory assembled ready to run
Length: 47.5"
Width: 7.5"
Height: 11" | *$64.99 |
 | 1:14 Yale VX-Series Remote Control Fork Lift
Brand: Rcjo Model: 8785501 Part Number: 8785501
Three AA batteries and 9V battery to operate
Equipped with a remote control unit
Moves 360 degrees
Lift up to 14 inches
Comes with a plastic pallet and crate
Three AA batteries and 9V battery to operate | *$39.99 |
 | 1:16 Scale Radio Control Battle Airsoft Tank
Brand: Hobby Mega
1:16 Full Function Radio Control
2-Speed System
Move All Direction
Turret Cannon Move Up and Down
Realistic Commander is Equipped
Light-Up Warning System
Excellent Maneuvering Performance
Sound Control System with Perfect Effects
Plastic Pellets Can Shoot As Far As 20 meters
Approx Operating Time 15 Minutes
Equipped with High Gripping Caterpillar
Powerful Motor Airsoft Gun
Auto Reload Bullet System
Quickly Rechargeable Battery
Start-up/ Extinguish Set
Gun Shell: 6mm BB Shell
Easy to Assemble
Length:14.5"
Width:7.3"
Height: 8" | *$79.99 |
 | 1:16 Scale Real Radio Control Smoke Battle Tank
Brand: Hobby Mega
1:16 Full Function Radio Control
2-Speed System
Move All Direction
Turret Cannon Move Up and Down
Realistic Commander is Equipped
Light-Up Warning System
Excellent Maneuvering Performance
Newest Smoke and Sound Control System with Perfect Effects
Plastic Pellets Can Shoot As Far As 20 meters
Approx Operating Time 15 Minutes
Equipped with High Gripping Caterpillar
Powerful Motor Airsoft Gun
Auto Reload Bullet System
Quickly Rechargeable Battery
Start-up/ Extinguish Set
Realitic Smoking Function
Gun Shell: 6mm BB Shell
Easy to Assemble
Length:14.5"
Width:7.3"
Height: 8" | *$79.99 |
 | 1ST GR LEAP AND THE LOST DINOSA
Brand: LEAPFROG ENTERPRISES Part Number: LFC30364
LEAP AND THE LOST DINOSAUR WITH INTERACTIVE CARDS - Take a trip with Leap and Professor Quigley as they travel back in time to return a lost baby dinosaur to its family. | *$6.99 |
 | 2 ActivePad Book & Cartridge Sets - 500 First Words and Colors & Shapes
Brand: Active Minds Part Number: ACTIVEPAD2PK500COLOR
ActivePAD Early Learning books introduce concepts that prepare children for preschool and beyond! Words, pictures, sound, music, and voice provide a total learning environment with a strong emphasis on reading readiness.Features:Ages 3 and Up500 First WordsFun themes such as picnics, playgrounds, and changing seasons frame these vocabulary and spelling activities. Everything is labeled and named aloud on these bright busy pages,Teaches: Basic Vocabulary; Opposites; Beginning SpellingColors And ShapesThis exciting book teaches children about basic shapes and colors using songs, games, and lots of silly sounds. Look and Find activities use familiar objects to reinforce the book's lessons.Teaches: Colors and Shape Identification; Classification; Patterns; Sorting | *$7.99 |
 | 2 Black Ghost Replacement Rotors Parts Kits Includes Main Rotor Blades, Tail Propellers & Shaft Spacers
Brand: Interactive Toy Part Number: K-BR-BG-REPKIT-2 | *$37.95 |
 | 2 BladeRunner RC Helicopter Replacement Parts Kits - Rotor Blades, Shaft Spacer Sets, Tail Propellers
Brand: Interactive Toy Part Number: K-BR-REPKIT-2
2 Replacement parts kits for the Blade Runner RC helicopters made by Interactive Toy Concepts. Included in each Bladerunner parts kit are a rotorset, a rotor drive shaft spacer set, and a tail rotor propeller. The rotors blades will fit the BladeRunner and BladeRunner2, but not the Bladerunner Search and Rescue, Firefly, or Micro Mosquito. It is good to keep few spare sets of Bladerunner rotors on hand as backups so you can keep flying, even after a crash. These Bladerunner repair kits include instructions on how to repair your damaged Bladerunner RC Heli. Each Bladerunner Parts Kit Includes: * 1 black upper Bladerunner rotor blade * 1 black lower Bladerunner rotor blade * 1 black Bladerunner tail propeller * 2 black Bladerunner rotor shaft spacers * 1 clear Bladerunner rubber retaining tube * Compatible with: Bladerunner & Bladerunner 2 rc helicopters How to Replace Your Bladerunner Rotor Blades: 1. The Bladerunner rotors are held in place by a short rubber tube at the very top of the main drive shaft. Remove this tube and the rotors will then slide off along with the two plastic spacers that keep the rotors separated. 2. When replacing the rotors, first slide on the lower rotor blade (the one with two notches in the bottom of the stem) 3. Slide on the two spacers 4. Slide on the upper rotor blade. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require much force to do when the parts are correctly oriented. 5. Finally attach the rubber retaining tube. Note: Not compatible with Bladerunner Search and Rescue, Firefly, or Micro Mosquito RC Helicopters. | *$38.95 |
 | 2 Micro Mosquito RC Helicopter Replacement Parts Kits: 2 Rotor Sets, 2 Tail Propellers, Spacers, Sto
Brand: Interactive Toy Part Number: K-BR-MM-REPKIT-2
2 replacement parts kits for the Micro Mosquito RC helicopter made by Interactive Toy Concepts. Each kit includes a rotor set, tail propeller, two spacer sets, two c-clips/locking pins. The rotors fit the Firefly or Micro Mosquito. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a crash. Includes: Rotor Set, Tail Propeller, Two Spacer Sets, Two C-clips/Locking Pins. Technical Information: 1 Upper and 1 Lower rotor, Diameter: 6.375" (162mm), Weight: 0.21oz (6g), Material: Plastic and Carbon Fiber. These rotor blades will only fit Firefly and Micro Mosquito RC Helicopters. Rotor Blade Replacement Instructions: 1) The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube. 2) Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated. 3) When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom). 4) Next, slide the plastic spacer shaft over the rotor shaft. 5) Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6) Lastly, reattach the rubber tube. NOTE: These rotor blades will NOT fit Bladerunner or Bladerunner Search and Rescue. | *$43.95 |
 | 2 pack 3 channel Wireless Mini Heli Dragonfly Helicopter w/LI-PO Battery
Brand: propel toys
Amazing Precision Control
Fly in any room
Operate up to 100 foot wireless range
Wireless 3-channel controller: allows you to fly w/others without any interference!
Experience all the excitement of authentic flight from the comfort of your own home!
POCKET FLYERS are the revolutionary wireless helicopters specially designed for INDOOR
flight! featuring LED strobe lights and dual rotor b lades,you can pilot this mini marvel
through your hallways,bedrooms,stairways and more.
Practice your landing skills or challenge a friend through your very own indoor stunt course
with the precision 3-channel wireless infrared controller! | *$47.89 |
 | 2 Piece Receiver&Battery HoldDown Kit:Stampede/VXL
Brand: Traxxas
This is the Reciever & Battery Hold-Down Plate for the Traxxas Stampede. / / FEATURES: Plastic construction, gray in color / Metal posts and body clips / / INCLUDES: One battery hold down / One receiver hold down / Two metal posts / Two body clips / Servo tape/adhesive foam pad / / REQUIRES: Installation on the Stampede / / tlw 1/23/08 / ir/jxs | *$4.32 |
 | 2 RC Tank Set - Play Together - They Shoot Infrared Beams
Brand: RCjo.com Model: 67117 Part Number: 67117
Full Function Radio Controlled
Turret Cannon Move All Directions
Move In All Directions
Shoots Each Other With Infrared Beams
Realistic Suspension System
Rubber Tracks
7.2v Rechargeable Battery Pack (Included)
Battery Charger (Included)
Excellent Maneuvering Performance
Factory Assembled Ready To Run
Instruction Manual | *$79.99 |
 | 2 Red Main Rotor Sets (2 Upper + 2 Lower Rotor Blades) For FireFly & Micro Mosquito RC Helicopters
Brand: Interactive Toy Part Number: K-BR-FF-ROTORSET-2
You will receive 2 complete rotor sets. Description per rotor set: Upper and Lower replacement red and black rotor blades that fit both the Firefly and Micro Mosquito remote control helicopters made by Interactive Toy Concepts. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a bad crash. Technical Data Per Rotor Set: * 1 Upper and 1 Lower rotor * Diameter: 6.375" (162mm) * Weight: 0.21oz (6g) * Material: Plastic and Carbon Fiber * These rotor blades will only fit Micro Mosquito and Firefly RC Helicopters Micro Mosquito and Firefly Rotor Blade Replacement Instructions: 1. The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube 2. Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated 3. When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom) 4. Next, slide the plastic spacer shaft over the rotor shaft 5. Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6. Lastly, reattach the rubber tube These rotor blades will only fit Micro Mosquito and Firefly RC Helicopters. These will NOT fit Bladerunner or Bladerunner Search and Rescue. | *$33.95 |
 | 2 Replacement Rotor Sets - Upper + Lower Rotors - Fits Firefly & Micro Mosquito RC Helicopters
Brand: Interactive Toy Part Number: K-BR-MM-ROTORSET-2
You will receive 2 rotor sets. Description for each rotor set: Upper and Lower replacement rotor blades that fit both the Firefly and Micro Mosquito remote control helicopters made by Interactive Toy Concepts. It is good to keep a spare set of rotors on hand as a backup so you can keep flying, even after a bad crash. Technical Data Per Rotor Set: * 1 Upper and 1 Lower rotor * Diameter: 6.375" (162mm) * Weight: 0.21oz (6g) * Material: Plastic and Carbon Fiber * These rotor blades will only fit Micro Mosquito and Firefly RC Helicopters Micro Mosquito and Firefly Rotor Blade Replacement Instructions: 1. The rotors are held in place by a short rubber tube at the top of the main drive shaft. Pull gently to remove this tube 2. Slide both rotors up and off, along with the plastic spacer that keeps the two rotors separated 3. When replacing the rotors, first slide on the lower rotor (the one with the notched shaft on the bottom) 4. Next, slide the plastic spacer shaft over the rotor shaft 5. Now slide on the upper rotor. The upper rotor is keyed to the D-shaped drive shaft and needs to be aligned in order to slide into place. This should not require any force to do when the parts are correctly oriented. 6. Lastly, reattach the rubber tube These rotor blades will only fit Micro Mosquito and Firefly RC Helicopters. These will NOT fit Bladerunner or Bladerunner Search and Rescue. Are you looking for Bladerunner Rotor Blades? Note: You can choose to receive red or black rotor blades. Other than the color they are exactly the same. | *$35.95 |
 | 2-3/4" LONG REMOTE CONTROLL SUPER MINI-X SUBMARINE
Brand: American Science & Surplus
Flood Forward Tanks! Dive! Dive! Dive this remote control submarine into a tub or a pool for super fun! The 2-3/4" x 2-3/8" x 1-3/8" Super Mini X-Sub moves forward, backward, left, right, up and down, at regular or Super Dive speed! The small transmitter has a 7- to 9-ft range and may be 40MHz or 49MHz. You provide (3) "AAA" batteries (which should power it for approx 150 minutes or more) and a body of water. Comes with a small bag of BBs for ballast, in case your sub is too buoyant. This is a dazzler -- a real kick to play with, according to the junior submariners around here! | *$9.95 |
 | 2-IN-1 SOLITAIRE(KLONDIKE & VEGAS STYLE)
Brand: bee Model: 30360 Part Number: 30360 | *$13.79 |
