 | #1500 Grit Ceramic (Blue) Professional Series Water Stone - Shapton
Brand: Professional Series
Our #1500 Grit Orange Shapton Professional Ceramic Water Stone is designed for professional use. It will very rapidly remove scratches from coarser stones and establish a wire edge (burr). The stone is fired at a high temperature with a mixture of medium coarse #1500 abrasive and a clay binder. Unlike other water stones, it does not need to be soaked prior to use. Simply add water to the surface and start sharpening. It is 8-1/4" x 2-3/4" x 5/8" and is shipped in a plastic storage case that can be used as a stone holder while sharpening. The case has rubber feet help prevent slippage. | *$45.00 |
 | #220 Grit Ceramic (Moss) Professional Series Water Stone - Shapton
Brand: Professional Series
Our <b>#220 Grit Moss Shapton Professional Ceramic Water Stone</b> is designed for the professional. It will very rapidly remove material to fix chips and change the overall shape of the edge. The stones are fired to a high temperature with a mixture of very coarse #220 abrasive and a clay binder. Unlike other water stones, it does not require soaking prior to use. Simply add water to the surface and start sharpening. It is 8-1/4" x 2-3/4" x 5/8" and is shipped in a plastic storage case that can be used as a stone holder while sharpening. The base has rubber feet to give a non-slip working surface. | *$40.00 |
 | #5000 Grit Ceramic (Wine) Professional Series Water Stone - Shapton
Brand: Professional Series
Our #5000 Grit Wine Professional Ceramic Water Polishing Stone will give a razor sharp edge with a bright polish. The stone is fired to a high temperature with a mixture of fine #5000 abrasive and a clay binder. Unlike other water stones, it does not need to be soaked prior to use. Simply add water to the surface and start polishing. It is 8-1/4" x 2-3/4" x 5/8" and is shipped in a plastic storage case that can be used as a stone holder while sharpening. The base has rubber feet to give a non-slip working surface. | *$65.00 |
 | #8 Dale Earnhardt Jr Collector Series Limited Edition Frost Cutlery Racing Numbered Knife
Brand: Frost Cutlery Model: CP-483DJ03
Dale Jr #8 Limited Edition Nascar Racing Knife by Frost Cutlery. Collector Series | *$9.88 |
 | #8000 Grit Ceramic (Melon) Professional Series Water Stone - Shapton
Brand: Professional Series
Our #12000 Grit Melon Professional Ceramic Water Polishing Stone will give a razor sharp edge with a mirror like polish. The stone is fired to a high temperature with a mixture of very fine #8000 abrasive and a clay binder. Unlike other water stones, it does not need to be soaked prior to use. Simply add water to the surface and start polishing. It is 8-1/4" x 2-3/4" x 5/8" and is shipped in a plastic storage case that can be used as a stone holder while sharpening. The base has rubber feet to give a non-slip surface. | *$87.00 |
 | 'Super-Grip' Heavy-Duty Strap Wrench Set
Brand: HI Part Number: HA-TP6506-08
Not your run-of-the-mill strap wrenches, these Super-Grip wrenches have extra-thick natural rubber straps with grip-ridges for incredible holding power--even on wet surfaces. One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee. | *$4.99 |
 | 0-1" Point Micrometer
Brand: VME Part Number: VME-PTM01
For measurement of small grooves, keyways, and other hard-to-reach dimensions. Points have approximately .012" radius. Range 0 - 1". Reads .001". Ratchet stop for exact and repetitive readings. Anvil and spindle hardened and precision ground - micro-lap f | *$49.90 |
 | 08-32 NC High Speed Steel Ground Thread 3 Piece Tap Set, Includes: Taper, Plug, Bottom
Brand: Titex Part Number: HSTS-0832
Tap sets include one each taper, plug, and bottoming tap of the same size a set of all three taps is recommended when tapping to the bottom of a blind hole. Get the job done with these uncoated bright finishhigh-speed steel taps, which are for use on almost any type of metal. Tap sets include one each taper, plug, and bottoming tap of the same size a set of all three taps is recommended when tapping to the bottom of a blind hole. | *$12.50 |
 | 1" Long Arm Allen Wrench (023-58034) Category: Hex Keys
Brand: Allen
Item #: 023-58034. All hex keys are precision formed to exact tolerances for precise fit<br>Resists rotational distortion <p><ul><li>Measuring System = Inch<li>Tip Size = 1 in<li>Tip Type = Hex<li>Material = Alloy Steel<li>Finish = Black Oxide<li>Handle Type = L-Handle</ul> Meets Fed. Std. GGG-K-275 AMED 1|Meets ASME/ANSI B18.3 <br>Customers also search for: Discount 1" Long Arm Allen Wrench, Buy 1" Long Arm Allen Wrench, Wholesale 1" Long Arm Allen Wrench, 082171580345, 58034, Hex Keys | *$25.81 |
 | 1" Power Tenon Cutter
Brand: Veritas
For anyone building rustic furniture, the Veritas aluminum-body tenon cutters will cut smooth, perfect tenons with radiused shoulders. Cutters are designed to run vibration free while being driven by an electric drill, yet still yield the same accuracy when used with a hand brace. The anodized body has been balanced to eliminate vibration and an integral level vial makes in-line cutting more accurate. | *$89.95 |
 | 1'' x 8 TPI x 2'' Woodturning Faceplate
Brand: Rockler
Choose from 2" and 3" True Turn woodturning faceplates and center marker. Great for bowl blanks, jam chucks and other turning needs of the woodworker! <br> <br> <br>True Turn faceplates are CNC machined from 6061 extruded aluminum and anodized for high quality and consistency, making them light, strong and durable. Each faceplate has eight screw holes for secure mounting to your work piece, allowing the use of smaller diameter faceplates for better access to your work and much less wood loss. Before you remove the faceplate from your work, be sure to mark it with a True Turn center finder. It will insure that your tailstock is centered when you remount your piece. | *$27.99 |
 | 1-1/2" Centering Square
Brand: VME Part Number: SQC-1
Made from ground tool steel. Hardened blade. Place on the end of a round bar and scribe lines to determine center. | *$7.75 |
 | 1-3/16" Jumbo Combination Wrench
Brand: Michigan Industrial Tools Part Number: 19558
Specifications:
Drop Forged Carbon Steel
Heat Treated and Chrome Plated
Buffed to a Mirror Polish Finish
Precision Machined 15 Open and 12-Point
Box Ends
Meet or Exceed ANSI Specs. B107.6 and B107.9
Space-Saving Hang Tags Hold Wrenches Securely
Hang Tags Allow Customers Hands-On Interaction with Product | *$6.12 |
 | 1-GALLON PAINT CAN LID WITH PLASTIC EASY POUR SCREW TOP PKG 3
Brand: American Science & Surplus
Paint Can Converter Turn any standard 1-gallon paint can into an easily re-sealable, spill-resistant, screw-cap container. The plastic lid snaps tightly into the can and has 2" ID mouth with a screw-cap. Keeps leftover paint from drying out and, even better, keeps your kids (or you) from dumping a gallon of Lizard-Lip Pink latex onto the hardwood floor while you're painting the living room. Much easier to pour from, too. You'll get a package of (3). | *$5.95 |
 | 1/2 In Dr Impact Socket, 12 Pt, Std, 12mm
Brand: Sunex International Part Number: 212ZM
1/2" Drive Impact Socket, 12 Point, Standard, Size 12mm Forged from the finest Molybdenum alloy steel - the best choice for strength and durability. Designed to extend the life of fasteners. Features a radius corner design causing the socket to grab the sturdy wall, or flat, of the fastener instead of grabbing the corners. This results in less corner wear on the fastener. Lifetime Warranty -- full replacement. | *$2.75 |
 | 1/2 In Drive 12 Pt Standard Metric Socket - 23mm
Brand: Sk Hand Tool Corp Part Number: 40323
1/2 In Drive 12 Pt Standard Metric Socket - 23mm Made in the U.S.A., featuring quality workmanship and value. The patented SureGrip® hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. High polish SuperKrome® plating results in a jewelry-like finish, providing long life and maximum corrosion resistance. Specifications: Hex Size - 23mm Diameter - 1.25" Overall Length - 1.62" Caution: Do not use chrome sockets or drive tools with impact or power tools. Such use damages the tool, and may also result in bodily injury. | *$7.95 |
 | 1/2 In Drive 12 Pt Std Fractional Impact Socket - 1/2 In
Brand: Sk Hand Tool Corp Part Number: 34416
1/2 In Drive 12 Pt Standard Fractional Impact Socket - 1/2 In Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGrip® hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide. Specifications: Hex Size - 1/2" Diameter - 1.00" Overall Length - 1.53" | *$5.95 |
| 1/2 In Drive 12 Pt Std Fractional Impact Socket - 5/8 In
Brand: Sk Hand Tool Corp Part Number: 34420
1/2 In Drive 12 Pt Standard Fractional Impact Socket - 5/8 In Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGrip® hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide. Specifications: Hex Size - 5/8" Diameter - 1.00" Overall Length - 1.53" | *$5.95 |
| 1/2 In Drive 12 Pt Std Fractional Impact Socket - 9/16 In
Brand: Sk Hand Tool Corp Part Number: 34418
1/2 In Drive 12 Pt Standard Fractional Impact Socket - 9/16 In Made entirely in the U.S.A., featuring quality workmanship and value. The patented SureGrip® hex design drives the side of the fastener, not the corner. This not only provides increased strength, but also avoids the rounding of rusted or damaged fasteners, which can occur when using a sharp cornered hex tool. The new black coating retains more rust preventative compound than black oxide. Specifications: Hex Size - 9/16" Diameter - 1.00" Overall Length - 1.53" | *$4.95 |
 | 1/2" and 3/8" Drive LED Socket Extension Light Combo Kit
Brand: ShopZeus Part Number: IDS406
<strong>Features and Benefits</strong><ul> <li>Extension light adapts to any socket and prevents need of flashlight for dark areas</li> <li>LED socket extension light prevents need to change out recessed bulb</li> <li>6 additional replacement batteries included</li> <li>Convenient On/Off switch to prevent continual loss of battery life</li> <li>Knurled grip adapter</li></ul>1/2" drive and 3/8" drive LED socket extension lights. Each unit comes with 3 batteries already in place, along with 3 additional per unit for total of 12 batteries included with kit. 3/8" female to 1/2" male adapter allows for use of 3/8" ratchet handle on either unit. Adapter has knurled grip as well. <P> | *$35.84 |
 | 1/2" Dr. 12mm Hex Bit Socket
Brand: Genius Tools Part Number: 442+2352 | *$4.25 |
 | 1/2" Drive x 10" Impact Extension
Brand: Michigan Part Number: 47827
Chrome Vanadium Steel Construction
All Sockets and Accessories
Meet ANSI Spec. B107.2 | *$5.60 |
 | 1/2" Drive x 13/16" Deep Socket 12pt
Brand: Michigan Part Number: 14241
Specifications:
Drop Forged Chrome Vanadium Steel
Heat Treated and Triple Chrome Plated for
Extra Durability
Tapered 6-Point or 12-Point Socket Ends for Easy Access to Nuts and Bolts
Featuring the Opti-drive System A Revolutionary Design That Allows You to:
Apply Greater Torque without Damaging the Fastener or Socket
Distribute Stress Evenly on the Socket to Prolong
its Life
Reduce Wear and Tear on Socket by Optimizing Flat Surface Contact
Eliminate Corner Contact, so Fasteners do not Round off | *$3.96 |
 | 1/2" Drive x 15" Pro Flex Breaker Bar
Brand: Michigan Industrial Tools Part Number: 1701
1/2" Dr. X 15" Pro Flex Breaker Bar | *$9.45 |
 | 1/2" Drive x 25" Mechanic's Flex Breaker Bar
Brand: Michigan Industrial Tools Part Number: 1703
1/2" Dr. X 25" Mechanic's Flex Breaker Bar | *$20.70 |
 | 1/4 In Dr Torque Wrench - Ergonomic Micro Adjustable - Plastic Handle - Ratchet Head - 20-150 In/Lb
Brand: CDI Torque Part Number: 1501MRPHSS
1/4" Dr Ergonomic Micro-Adjustable Plastic Handle Torque Wrench 20-150 In/LbThe comfort handle series features an ergonomically designed grip that is tough, durable and comfortable to operate. While utilizing all the same great features of the metal handle wrench, the comfort series adds an ergo-shaped grip which was designed with the user in mind. Single scale inch pounds. Positive lock with spring loaded pull down lock ring. Fast, accurate and easy to set. Easy-to-read laser marked scales. Most ratchets feature Quick Release buttons for easy socket removal. Ergonomic comfort grip for ease of use. Accuracy ± 3% Supplied with Certificate of Calibration traceable to NIST. Meets or exceeds ASME B107.14M-1994, ISO 6789 Standards. Torque Range: 20-150 in. lb. Increment: 1 in. lb. Sq. Drive Size: 1/4" Head Style: Ratchet Length: 9-3/4" Weight: .75 lbs. Plastic handle A 25% restocking fee is charged to return this item (unused). | *$95.00 |
 | 1/4 In Drive 6 Pt Deep Metric Socket - 15mm
Brand: Sk Hand Tool Corp Part Number: 41711
1/4 In Dr 6 Pt Deep Metric Socket - 15mm 0.81 In Diameter & 2 In Length. | *$6.95 |
 | 1/4 In Drive Locking Socket Extension - 7.25 In Length
Brand: Sk Hand Tool Corp Part Number: 40992
1/4" Drive Locking Socket Extension - 7.25" Length S-K`s locking extensions feature a SureGrip® lock which holds the socket on the extension. This stops the problem of sockets remaining stuck to a fastener, usually in a hard to reach location. S-K sockets have 4 recess detents in socket drive square for quick attachment. High polish SuperKrome® plating results in a jewelry-like finish, providing long life and maximum corrosion resistance. | *$22.95 |
 | 1/4 In Drive Socket Extension - 14 In Length
Brand: Sk Hand Tool Corp Part Number: 40964
1/4" Drive Socket Extension - 14" Length Allows greater flexibility for all your sockets and drive tools. Ball detent securely holds Al sockets on coupler. Extensions feature S-K SuperKrome® finish. | *$13.95 |
 | 1/4" 5/16" 3/8" Imp Triple Header Bend (389-368-FH) Category: Hand Benders
Brand: Imperial
Item #: 389-368-FH. Calibrated markings for making accurate left-hand, right and offset bends<br>90ø start requires less effort <p><ul><li>Throat Tube O.D. = 1/8 in, 3/16 in, 1/4 in<li>Angle = 180.0ø [Max]<li>Jaw Radius = 9/16 in [Min]<li>Cut Applicable Materials = Soft Copper, Aluminum, Steel<li>Handle Jaw Body Brand Name = Imp&reg<li>Cross Section Shape = Round<li>Type = Lever Bender<li>Handle Packing Wt. = 1/2 lb</ul> <br>Customers also search for: Discount 1/4" 5/16" 3/8" Imp Triple Header Bend, Buy 1/4" 5/16" 3/8" Imp Triple Header Bend, Wholesale 1/4" 5/16" 3/8" Imp Triple Header Bend, 699244110639, 368-FH, Hand Benders | *$28.98 |
 | 1/4" Drive Click Torque Wrench 20-200in LB
Brand: Michigan Model: 2432 Part Number: 2432
Professional Quality
Dual Scale Torque Range:
20-200 Inch/Lbs., 23-230 CMKG
Complete with Conversion Table Chart
and Molded Plastic Carrying Case | *$29.89 |
 | 1/4" Drive x 3" Extension Bar
Brand: Michigan Industrial Tools Part Number: 14128
Specifications:
Drop Forged Chrome Vanadium Steel
Heat Treated and Triple Chrome Plated for
Extra Durability
Tapered 6-Point or 12-Point Socket Ends for Easy Access to Nuts and Bolts
Featuring the Opti-drive System A Revolutionary Design That Allows You to:
Apply Greater Torque without Damaging the Fastener or Socket
Distribute Stress Evenly on the Socket to Prolong
its Life
Reduce Wear and Tear on Socket by Optimizing Flat Surface Contact
Eliminate Corner Contact, so Fasteners do not Round off | *$1.53 |
 | 1/4" Letter Stamping Set
Brand: Papa John'S Toolbox | *$19.95 |
 | 1/4" Number Stamping Set
Brand: Papa John's Toolbox | *$7.95 |
| 1/8" Letter Stamping Set
Brand: Papa John's Toolbox | *$12.25 |
| 1/8" Number Stamping Set
Brand: Papa John'S Toolbox | *$5.95 |
 | 10 pc T-HANDLE HEX Allen Key Wrench SAE STANDARD Sizes 3/32" - 3/8"
Brand: Anytime Tools Part Number: AT200931
Professional Quality tool. High torque T-handles provide firm grip and easy turning. Color-coded handles and individually organized stand makes it easy to find the correct size. Shanks constructed from hardened carbon steel. Set includes these sizes: SAE 3/32" 7/64" 1/8" 9/64" 5/32" 3/16" 7/32" 1/4" 5/16" 3/8" | *$11.99 |
 | 10 Piece Diamond Needle File Set
Brand: ToolsNow Part Number: 4120
This diamond needle file set is great for handicrafts and hobbies such as model building and finishing. These diamond files are ideal for intricate work in confined spaces. This mini file set is made of high grade diamond sand and has comfortable double colored cushion handles. These craft/hobby files are perfect for a wide variety of projects around the home or workshop. | *$9.99 |
 | 10" Hemostat Forceps
Brand: Papa John'S Toolbox | *$8.00 |
 | 10,000-Meter DIGITAL Measuring Wheel - Retractable Handle - LCD Readout!
Brand: RRT Part Number: RR-01594L
Simple-to-use, easy-to-store version of an essential measurement tool for contractors, landscapers, appraisers, inspectors and Realtors. One-year warranty and Jack's Tool Shed worry-free Satisfaction Guarantee. | *$16.97 |
 | 10-918 Roberts 18" Vinyl Tile Cutter
Brand: QEP Model: 10-918 Part Number: 10-918
Moveable cutting guide for consistent and accurate repetitive cutting of VCT ,Built-in casters for greater maneuverabilty and rubber feet for added stabilty, Clearly marked measuring guide and 45 degree mitre guide, Includes durable nylon carrying case complete with two 5-1/2" x 7" pouches for smaller tools, Cuts 18" tiles or 12" tiles diagonally, Extended 2 year warranty. | *$349.99 |
 | 10-pc. Needle File Set
Brand: Michigan Industrial Tools Part Number: 6655
Specifications:
Hardened and Tempered Alloy Steel Construction
Precision Milled Cutting Teeth
Knurled Handles for a Sure Grip
5-1/2" Overall Length
Contents:
2pc. Round
2pc. Knife
1pc. Half-Round
2pc. Triangular
1pc. Flat
1pc. Square
1pc. Oval | *$3.96 |
 | 10-pc. T-Handle Hex Key Wrench - MM
Brand: Michigan Industrial Tools Part Number: 2547
10pc. Wrenches Sizes:
2 - 2.5 - 3 - 4 - 4.5 - 5 - 5.5 - 6 - 8 - 10mm | *$11.25 |
 | 100 Pc. 2" Mini Spring Clamps
Brand: Papa John's Toolbox | *$24.00 |
 | 100 Piece Security Bit Set
Brand: Boston Industrial Model: 10910
1 Wing Nut Driver.
1 Magnetic Bit Holder.
1 Socket Bit Holder.
1 1/4" Sq. x 1/4" Hex x 1" Extension.
1 1/4" Sq. x 1/4" Hex x 2" Extension.
3 Clutch.
3 Torq.
3 Spline.
6 Metric Hex Tamper Proof.
6 Fractional Hex Tamper Proof.
9 Slotted.
9 Metric Hex.
9 Torx.
9 Torx Tamper Proof.
10 Fractional Hex.
1 Blow Mold Case.
4 Tri-Wing.
4 Square Recess.
4 Spanner.
8 Phillips.
8 Pozi-Drive.
Professional Quality Tool. | *$7.49 |
 | 1006 Crimping Tool Non Insulating Connectors
Brand: KLEIN TOOLS Model: 1006 Part Number: 1006
DESIGNED FOR CRIMPING NON-INSULATED, SOLDERLESS TERMINALS AND CONNECTORS FROM 10 TO 22 AWG. HARDENED WIRE CUTTER IN NOSE. ONE HANDLE IS RED, THE OTHER BLACK TO IDENTIFY PROPER CRIMPING POSITION. 9-3/4" OAL. (USA). NON-INSULATED. | *$22.28 |
 | 10LB MAGNETIC BELT-CLIP TOOL-HOLDER
Brand: Hawk Part Number: MC-99325
Snaps to any belt - this magnetized tool holder will hold up to 10 lbs. of your favorite tools. Package Dimension: 3.75'' X 7.5'' X 1'' | *$5.65 |
 | 10pc Mini Needle DIAMOND FILE Set = ceramics + tile + glass
Brand: hobbytoolsupply
Here's a set of (10) tiny embedded-diamond files with round dipped handles, just in case you have some tiny embedded diamonds that need filing. The file portions are 1 mm to 2 mm wide, with assorted pointed-round, pointed-flat, and blunt-flat tips. | *$7.49 |
 | 11 Pc End Open and Boxed Combination Standard Wrench Set - SAE
Brand: ProForge Part Number: 2462F
11 piece open and boxed professional wrench set. Made from heat treated chrome vanadium steel. Fully polished smooth design. Accurate hardened and tempered. Includes hanging storage pouch. Sizes 3/8'', 7/16'', 1/2'', 9/16'', 5/8'', 11/16'', 3/4'', 13/16", 7/8'', 15/16'', 1". Lifetime warranty. SKU: 2462F | *$14.99 |
 | 11 pc FEMALE E-TORX (star) SOCKET Set w/RAIL
Brand: Anytime Tools Part Number: AT201430
Professional HEAVY DUTY tool set. These bits will allow you to open those Torx/Star male fasteners. These are common on European made cars such as BMW. Mercedes, Volvo etc. Features: Drop Forged, Chrome Vanadium Steel. Heat Treated. Contents: 5 pc 1/4" Drive Sockets E4, E5, E6, E7, E8 6 pc 3/8" Drive Sockets E10, E12, E14, E16, E18, E20 Matched clip-on Storage Rail. | *$12.99 |
