|
|
 | Mexican Tile - 4x4 Amapola Verde Talavera
Brand: Tierra y Fuego Part Number: 10077-4
The Amapola Verde talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Anita Talavera
Brand: Tierra y Fuego Part Number: 10041-4
The Anita talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Blue Yellow Harlequin Talavera
Brand: Tierra y Fuego Part Number: 10032-4
The Blue White Harlequin talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Blue Chapala Talavera
Brand: Tierra y Fuego Part Number: 10122-4
The Blue Chapala talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Blue Kiosco Talavera
Brand: Tierra y Fuego Part Number: 10008-4
The Blue Kiosco talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Chapala Talavera
Brand: Tierra y Fuego Part Number: 10125-4
The Chapala talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Daisy Terra Cotta Talavera
Brand: Tierra y Fuego Part Number: 10066-4
The Daisy Terra Cotta talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Dolores Talavera
Brand: Tierra y Fuego Part Number: 10175-4
The Dolores talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Espiga Verde Talavera
Brand: Tierra y Fuego Part Number: 10229-4
The Espiga Verde talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Flecha Talavera
Brand: Tierra y Fuego Part Number: 10117-4
The Flecha talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Green Seville 2 Talavera
Brand: Tierra y Fuego Part Number: 10209-4
The Green Seville 2 talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Hacienda Amarilla Talavera
Brand: Tierra y Fuego Part Number: 10181-4
The Hacienda Amarilla talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Hacienda Talavera
Brand: Tierra y Fuego Part Number: 10106-4
The Hacienda talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Honey Suckle Talavera
Brand: Tierra y Fuego Part Number: 10116-4
The Honey Suckle talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Jardin Talavera
Brand: Tierra y Fuego Part Number: 10100-4
The Jardin talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Moño Talavera
Brand: Tierra y Fuego Part Number: 10143-4
The Moño talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Monaco Talavera
Brand: Tierra y Fuego Part Number: 10168-4
The Monaco talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Palacio Sencillo Talavera
Brand: Tierra y Fuego Part Number: 10127-4
The Palacio Sencillo talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Potosi Talavera
Brand: Tierra y Fuego Part Number: 10149-4
The Potosi talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Quarter Sun Talavera
Brand: Tierra y Fuego Part Number: 10238-4
The Quarter Sun talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 San Blas Talavera
Brand: Tierra y Fuego Part Number: 10072-4
The San Blas talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Tamazula Talavera
Brand: Tierra y Fuego Part Number: 10208-4
The Tamazula talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Tapatio Talavera
Brand: Tierra y Fuego Part Number: 10137-4
The Tapatio talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Terra Cotta Blue Lace Talavera
Brand: Tierra y Fuego Part Number: 10108-4
The Terra Cotta Blue Lace talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Vine 2 Talavera
Brand: Tierra y Fuego Part Number: 10241-4
The Vine 2 talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Yellow Daisy Talavera
Brand: Tierra y Fuego Part Number: 10017-4
The Yellow Daisy talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | Mexican Tile - 4x4 Yellow Marguerite Talavera
Brand: Tierra y Fuego Part Number: 10074-4
The Yellow Marguerite talavera tile can be a perfect complement to decorate a bathroom shower wall, a kitchen backsplash, a fireplace, a stairway, or any other project you have in mind. Each of our Mexican talavera tile is unique and handcrafted. The hand made nature gives it a warm and rustic finish. The tiles are made from clay dug out of the ground and fired to a temperature at which the clay undergoes chemical changes and becomes permanently hard. Then the tile is glazed and decorated by hand, and fired once again to give it its final and lively finish. Its physical characteristics make Mexican tiles particularly attractive and distinctive. Characteristics of Mexican Talavera Tile: 1) All sizes are nominal. Due to the handcrafted nature heir ACTUAL SIZE is approximately 4 1/8 x 4 1/8 in. 2) Handcrafted talavera tiles are not perfectly square. 3) The height and length of a tile may not be the same. 4) Measurements within a tile may vary by as much as 1/8 in. 5) All of our standard Mexican tiles have a 1/4 in. thickness. 6) The tiles are slippery when wet if used as floors. 7) Industry standard recommends to add on 5-10% additional to the tile needed to account for waste, special cuts, or other unforeseen problems. This is particularly important in complex installations. 8) Lot variation in size and color may be present. 9) There is no guarantee that tiles ordered as add-ons will match those from the original orders. This is an inherent characteristic in all ceramic tiles, and particularly in all handcrafted tiles. 10) Talavera tiles are NOT frost proof. SUITABLE TILE USAGE FOR MEXICAN TALAVERA TILE: All residential and commercial wall applications, bathroom walls, light-use countertop, showers, back splashes, fireplaces, counters, and light-use flooring; as accents flooring, or as a border to define an area. Pool chemicals may negatively impact glazes. Not slip resistant. Outdoor use is subject to climate. | *$1.85 |
 | MFM Building Products 50036 Peel Seal
Brand: MFM Building Products Part Number: 50036
Self adhering waterproofing material featuring a reflective aluminum surface. Multiple laminations of special aluminum foil, high density polymer films and a thick layer of rubberized asphalt waterproofing compound. Easily installed by removing the releas | *$73.88 |
 | Michigan Industrial Tools MIT Tool 1200 lb Hand Cable Winch
Brand: Michigan Industrial Tools Part Number: 5552
MIT 1200-LB. HAND WINCH (CABLE) features: * 1200-Lb. Pulling Capacity * Zinc Plated Heavy Gauge Steel Construction * Smooth-Action, Single Speed Ratcheting Crank with 4:1 Gear Ratio Generates Extra Pulling Power with Less Effort * Ideal for Trailering/Loading Applications: Boats, Personal Watercraft, Lawn Equipment, Etc. * Extra Long 9" Handle for Easier Operation * Comfortable Handle Grip Reduces Fatigue * 3-Position Locking Pawl Allows Forward and Reverse Ratcheting Action * Drop Forged Safety Catch Hooks * 3/16" x 65' Steel Cable | *$37.50 |
 | Michigan Industrial Tools MIT Tool 2 Ton Power Puller
Brand: Michigan Industrial Tools Part Number: 5541
MIT 2-TON POWER PULLER features: * Hardened and Galvanized Heavy Gauge Steel Construction * One Piece Frame Construction with Heavy Duty Frame Bolts * Extra-Strong Braided Aircraft Cable * Drop Forged Safety Catch Hooks * Heavy Gauge Steel Ratchet Handle with Padded, Non-Slip Grip for Extra Leverage * Automatic Notch-at-a-Time Letdown Release Thumb Control for Maximum Safety * Powerful Ratcheting System is Excellent for Pulling Heavy-Duty Loads! | *$16.98 |
 | Michigan Seat Highback Suspension Seat, Model# V-5300
Brand: Northern Tool Equipment
Michigans finest seat. Seat has adjustable: suspension, seat back angle, lumbar support, plus the armrest height and angle. Ergonomically styled, variable-rate suspension seat has full-length polypropylene back cover. Safety switch hole with MSC patented actuator. Its a great seat that minimizes mowing time due to its comfort. Weight adjustable up to 270 lbs. Measures 18 1/2in.W x 22 1/2in.D x 23 1/2in.H. Mounting hardware not included. Water drain. U.S.A. Shell: Polypropylene, Capacity (lbs.): 270, Adjustable: Yes, Includes: Lumbar support, armrest height and angle, water drain, Dimensions W x D x H (in.): 18 1/2 x 22 1/2 x 23 1/2 | *$319.99 |
 | Michigan Seat Lawn Tractor Seat, Model# V-250
Brand: Northern Tool Equipment
Weather-resistant vinyl covering over thickly padded, steel pan. 17in.W x 15 1/2in.D x 6in.H. Popular replacement for Snapper, MTD, Roper, Murray, Bolens, OMC and others. Use 8 1/4in.W x 3in.D mounting pattern, OR the 1/2in. center hole Color: Black, Shell: Vinyl, Material: Thickly padded steel pan, Dimensions W x D x H (in.): 17 x 15 1/2 x 6 | *$39.99 |
 | Michigan Seat Molded Forklift Seat, Model# V-830
Brand: Northern Tool Equipment
Contemporary styling, molded seamless vinyl seat for compact utility tractors, backhoes, skidsteer loaders and forklifts. Waterproof. Openings allow rain to drain off. Seat belt mount included. Mounting pattern: 8in. x 11 1/2in. and 11 1/4in. x 11 1/2in. standard mounting. U.S.A. Color: Black, Material: Molded seamless vinyl, Dimensions W x D x H (in.): 18.5 x 21.75 x 17.44 | *$89.99 |
 | Michigan Seat Universal Lawn Mower Midback Seat, Model# V-3500
Brand: Northern Tool Equipment
Provides a choice of mounting patterns: 7 1/2in. x 7in., 9in. x 5 1/2in., 8 1/4in. x 2 15/16in. and center bolt. Black vinyl molded cushion construction. Seat dimensions: 19in.W x 15 5/8in.D x 8 7/8in.H. U.S.A. Color: Black, Shell: Vinyl, Material: Molded cushion, Dimensions W x D x H (in.): 19 x 15 5/8 x 8 7/8 | *$49.99 |
 | Midwest Air Tech #889553A 7x100 Black Deer Fencing
Brand: Midwest Air Technologies Model: 889553A Part Number: 889553A
7' x 100', .66" x .94" Mesh, Black, PVC Deer Block Fencing, Mid-Grade Netting Used As A Perimeter Fence Or Netting. | *$53.91 |
| Midwest Air Tech #889554A 7x100 3/4Mesh Netting
Brand: Midwest Air Technologies Part Number: 889554A
7' x 100', 3/4" x 3/4" Economy Grade Mesh, Black, PVC Deer Bird Netting. | *$17.83 |
 | Midwest Air Tech #901147A RED Fence Post Driver
Brand: Import Model: 901147A Part Number: 901147A
Red Fence Post Driver With Pin. | *$20.55 |
 | Midwest Air Tech #901176AB 6' Green T Fence Post
Brand: Import Model: 901176AB Part Number: 901176AB
6', Green, Studded Tee Fence Post, Rail Steel. 1.25 LB/FT. | *$7.29 |
 | Midwest Air Tech/import 901154A Light Duty U-style Fence Post 4' - Green (Pack of 5)
Brand: Midwest Model: 901154A Part Number: 901154A
4' , Green, Light Duty, U Style Fence Post, Steel, 14 Gauge. | *$13.53 |
 | Mighty Mule FM135 Single Button Entry Transmitter for Mighty Mule Automatic Gate Openers
Brand: Mighty Mule Model: RB741-1 Part Number: FM135
The entry transmitter is standard equipment with all Mighty Mule automatic gate openers. An unlimited number of transmitters can be added to any system by simply adjusting the code on the new transmitter to match your current gate opener code. The single button transmitter comes with a Visor Clip for placement in your vehicle visor. Two and Three button remotes are also available for use with multiple gates or garage doors. One 9 Volt battery included. | *$14.50 |
 | Mile Marker 7075 Truck-Mounted Winch Wireless Remote
Brand: Mile Marker Model: 7075 Part Number: 7075
Mile Marker Truck-Mounted Winch Wireless Remote is manufactured to control and operate winches safely, minimizing possibilities of accidents. This remote can be effectively used from a good 10 to 12 feet away from the winch and its special features ensure automatic operation. It is linked to any key chain and aim at the cab-mounted receiver for the vehicle to be winched. | *$89.99 |
 | Mile Marker 8502 Winch Cover
Brand: Mile Marker Model: 8502 Part Number: 8502
Mile Marker Winch Covers protect your winch from harsh weather elements, road salt, and road wear. They are made of a special fabric-coated vinyl material and feature the Mile Marker logo. These covers resist damage from the sun and ozone, as well as oil and other chemicals. | *$33.95 |
 | Mile Marker Replacement Cable and Hook 3/8" x 100 ft. Cable With Hook
Brand: Mile Marker Part Number: 19-50020C
For safe and effective winching always replace your winch cables at the first sign of stranding. To help ensure the saftey of yourself and your vehicle Mile Marker manufactures replacement winch cables out of galvanized aricraft cable, ensuring rugged and tough construction. Available in several thicknesses, lengths and with or without replacement hooks. | *$124.95 |
| Milemarker 19-50010C 5/16 in. X 100 ft. Winch Cable and Hook. Same as Warn
Brand: Mile Marker Part Number: 19-50010C
Milemarker 5/16 in. X 100 ft. Winch Cable and Hook. Same as Warn 27110 | *$66.95 |
 | Milemarker 35-5020-41 Vehicle Adapter Kit for Toyota
Brand: Mile Marker Part Number: 35-5020-41
Milemarker Vehicle Adapter Kit for Toyota Vehicle adapter kit is to be used with 75-Series and HI-Series Winches. | *$76.95 |
 | Milemarker 75-52000C Hydraulic Winch HI Series 12,000 lbs.
Brand: Mile Marker Part Number: 75-52000C
Milemarker 12,000 lb. Hydraulic Winch HI Series HI12000 Hydraulic Winch HI Series features freespooling, power in and out, mechanical lock, underwater use, corrosion resistant, stainless steel tie bars and fasteners, and reversible mounting. HI Series Winch includes all hoses, integrated solenoid valve, remote pendant station, cable, roller fairlead and fasteners. Rated Line Pull 12,000 lbs.@1500 PSI (single line) (5,454 kgs.) Gear Train Planetary Gear Ratio 6:1 (low gear) 1:1 (high gear) Motor 18.7 C.I. Hydraulic Directional Control 12V Solenoid 3 way Valve Integrated (maximum rated flow 3.5 gpm) draws 2 amps Control Switch Remote Switch, 12' lead Hoses 2 hoses (5' and 7') Steel Braid High Pressure, 3,000 PSI rating. Use size 6 JIC swivel female on both ends. Cable 3/8 x 100' (14,400 nominal) Drum Size Diameter 2.5 (6.4cm) Drum Size Length 9 (23cm) Total Shipping Weight 110 lbs. Performance Specifications 3.5 GPM@1500 PSI Layer of Cable 1 2 3 4 Line Speed-Low Gear (FPM) 5.65 6.43 7.41 8.58 Rated Pull (lbs.) 12,000 9,400 8,200 7000 Line Speed-High Gear (FPM) 31 36 42 48 Rated Pull (lbs.) 2,000 1,550 1,350 1,150 The solenoid directional control valve is always in the same location as the winch Usually only used in permanently front-mounted applications Includes all hoses, integrated solenoid valve, remote pendant station, cable, roller fairlead fasteners use the 35 series vehicle adapter kit for the HI series to function with the vehicle's power steering pump steering gearbox. NOTE: Requires 35 Series Vehicle Adapter Kit to be operated from OE Power Steering Pump. | *$1,279.95 |
 | Milemarker 77-50105 PE2.5 Permanent Magnet Electric Winch 2500 lbs
Brand: Mile Marker Part Number: 77-50105
Mile Marker Permanent Magnet Electric Winch 2500 lbs Features Planetary gear system for fast line speed, free spooling Power in and power out 8ft hand-held remote switch Limited 2 year warranty  Specifications Part Number 76-50105 Gear Train Planetary gear system for fast line speed Rated Line Pull (single line) 2500 lbs. (1134 kgs) Gear Reduction Ratio 153:1 Motor Permanent magnet .9hp (.7kw), 12V DC Drum Size: Diameter / Length 2 in x 3.15in Cable supplied (min break force 4200 lbs nominal) 3/16 in (4.76 mm) x 50 ft. (15.24 m) aircraft cable Overall Dimension (LxWxH) 13 in x 5 in x 5 in Total Shipping Weight 23 lbs (10.43 kgs) Mounting Bolt Pattern 4.88 in x 3 in (124mm x 76.2mm) | *$219.95 |
 | Milescraft 1004 Rotary Tool Grout Removal Attachment Combo Kit
Brand: Milescraft Model: 1004 Part Number: 1004
Milescraft 1004 Rotary Tool Grout Removal Combo Kit. Make your Dremel into a Grout Remover. Two products in one. Angle Plunge removes grout from flat surfaces with it's unique plunging action. Corner Grout Remover removes grout from tight corners. Includes; angle plunge attachment, corner grout remover, 1 multi-purpose bit, and instruction manual. Rotary tool not included. For use with most Dremel, Black and Decker RTX, Co/Tech, King Craft, Budget, Maxicraft, Einhell, Wetekom, and Skil Small Rotary tools. | *$13.21 |
 | MILESTEK RJ11 JACK WHITE
Brand: Milestek
Milestek's RJ11 jack simply snaps in to our wall plates to give you the video connection you need. The F type jacks allow for simple termination. Installation of wire through back is quick with the snap down cover. | *$1.95 |
 | Mill Hinged Gutter Guard
Brand: Amerimax Model: 85280 Part Number: 85280
3', Metal, Hinged Gutter Guard. | *$4.29 |
|
|
|
|
|
| eBay Results |
|---|
| | Title | Price | Shipping | Total | Currency | Time Left |
|---|
 | GUTH Lightning Loading Dock Light 64" NEW | 30.00 | 22.00 | 52.00 | USD | 37 minutes 3 seconds |  | SONY VIDEO LIGHT MODEL # HVL-200W | 1.04 | 15.00 | 16.04 | USD | 37 minutes 49 seconds |  | SONY VIDEO LIGHT MODEL # HVL-200W | 0.99 | 15.00 | 15.99 | USD | 39 minutes 49 seconds |  | Hands Free 16 LED Head Light Torch.Work Tool.Mechanic | 9.01 | 6.00 | 15.01 | USD | 40 minutes 4 seconds |  | Hands Free 7 LED Head Light Torch.Work Tool.Mechanic | 7.21 | 6.00 | 13.21 | USD | 44 minutes 3 seconds |  | NEW ADVANCE LIGHTING CAPACITOR 7C100M40R | 29.99 | 10.70 | 40.69 | USD | 45 minutes 33 seconds |  | WORKLIGHT WORK LIGHT.ULTRA BRIGHT 60 LED.Rechargeable | 24.05 | 15.03 | 39.08 | USD | 49 minutes 20 seconds |  | Non-Metallic Incandescent Utility Light Lamp Swivel | 14.99 | 6.99 | 21.98 | USD | 1 hour 5 minutes 30 seconds |  | Pro Series Metal Shield Incandescent Utility Light 16gu | 23.99 | 6.99 | 30.98 | USD | 1 hour 5 minutes 32 seconds |  | FLUORESCENT LIGHT BALLAST, F96, F84, F72, F64, F60, F48 | 0.01 | 0.00 | 0.01 | USD | 1 hour 13 minutes 24 seconds |  | FLUORESCENT LIGHT BALLAST, F96, F84, F72, F64, F60, F48 | 0.01 | 0.00 | 0.01 | USD | 1 hour 14 minutes 12 seconds |  | FLUORESCENT LIGHT BALLAST, F96, F84, F72, F64, F60, F48 | 0.01 | 0.00 | 0.01 | USD | 1 hour 15 minutes 18 seconds |  | FLUORESCENT LIGHT BALLAST, F96, F84, F72, F64, F60, F48 | 0.01 | 0.00 | 0.01 | USD | 1 hour 15 minutes 57 seconds |  | FLUORESCENT LIGHT BALLAST, F96, F84, F72, F64, F60, F48 | 0.01 | 0.00 | 0.01 | USD | 1 hour 16 minutes 50 seconds |  | Non-Metallic Incandescent Utility Light Lamp Swivel | 14.99 | 6.99 | 21.98 | USD | 1 hour 40 minutes 45 seconds |  | Pro Series Metal Shield Incandescent Utility Light 16gu | 23.99 | 6.99 | 30.98 | USD | 1 hour 40 minutes 46 seconds |  | Non-Metallic Incandescent Utility Light Lamp Swivel | 14.99 | 6.99 | 21.98 | USD | 1 hour 42 minutes 23 seconds |  | Pro Series Metal Shield Incandescent Utility Light 16gu | 23.99 | 6.99 | 30.98 | USD | 1 hour 42 minutes 27 seconds |  | Non-Metallic Incandescent Utility Light Lamp Swivel | 14.99 | 6.99 | 21.98 | USD | 1 hour 46 minutes 33 seconds |  | Pro Series Metal Shield Incandescent Utility Light 16gu | 23.99 | 6.99 | 30.98 | USD | 1 hour 46 minutes 33 seconds |  | RAB WP2F26 26w CFL Lighting Wall Packs | 99.99 | 9.99 | 109.98 | USD | 1 hour 50 minutes 56 seconds |  | CASE OF 24 6" Black Baffle Recessed Can Light Trims | 69.00 | 0.00 | 69.00 | USD | 1 hour 58 minutes 11 seconds |  | CASE OF 24 6" Black Baffle Recessed Can Light Trims | 69.00 | 0.00 | 69.00 | USD | 1 hour 58 minutes 27 seconds |  | LED Cap Light Clip On | 4.99 | 0.00 | 4.99 | USD | 2 hours 2 minutes 33 seconds |  | New 150 Watt HPS Ballast Kit With Starter Single Tap | 25.99 | 2.87 | 28.86 | USD | 2 hours 3 minutes 39 seconds |  | 500W Portable Halogen Light W/Bulb Weather Resistant | 28.95 | 0.00 | 28.95 | USD | 2 hours 6 minutes 33 seconds |  | 2-Pack Mechanics Choice 500W Portable Halogen WorkLight | 14.99 | 10.00 | 24.99 | USD | 2 hours 8 minutes 9 seconds |  | 2 Pack 60W Ceiling Fan Bulb by Westinghouse 03937 | 4.99 | 3.99 | 8.98 | USD | 2 hours 14 minutes 7 seconds |  | 12 Pack 60W Ceiling Fan Bulbs by Westinghouse 03937 | 29.94 | 7.99 | 37.93 | USD | 2 hours 15 minutes 23 seconds |  | RAB WP1F42 Fluorescent 42 Watt WALL PACK | 69.99 | 9.99 | 79.98 | USD | 2 hours 22 minutes 41 seconds |  | Advance175W M57 Metal Halide Core & Coil Ballast Kit | 15.51 | 14.99 | 30.50 | USD | 2 hours 23 minutes 15 seconds |  | WP2F84 --84 Watt Wall Pack Fixture RAB | 99.99 | 9.99 | 109.98 | USD | 2 hours 26 minutes 1 second |  | INCREDIBLE GADGET NEW VIRTUAL CLOCK GREAT LOOK LIGHTING | 99.95 | 19.00 | 118.95 | USD | 2 hours 35 minutes 10 seconds |  | RAB WP2H175QT 175w WALL PACK | 89.99 | 9.99 | 99.98 | USD | 2 hours 35 minutes 37 seconds |  | 6" Recessed Lighting- Thomas- INC-HSG Nail- Lot of 8 | 35.00 | 0.00 | 35.00 | USD | 2 hours 49 minutes 27 seconds |  | Cooper lights shop industrial 400watt volts 120 to 277 | 10.00 | 0.00 | 10.00 | USD | 2 hours 58 minutes 24 seconds |  | Lithonia AVAC30 Suspended Mount Kit New | 0.99 | 0.00 | 0.99 | USD | 3 hours 1 minute 2 seconds |  | Hubell CU120A H-MOSS Lighting Control 120v/24VDC NIB(3) | 20.00 | 10.20 | 30.20 | USD | 3 hours 7 minutes 30 seconds |  | 250 watt Metal Halide Bulbs - Mogul Base **3 - NEW** | 9.99 | 10.20 | 20.19 | USD | 3 hours 20 minutes 15 seconds |  | 250 watt High Pressure Sodium Bulbs **3 - NEW** | 9.99 | 10.20 | 20.19 | USD | 3 hours 23 minutes 41 seconds |  | 400 watt High Pressure Sodium Bulbs **3 - NEW** | 9.99 | 10.20 | 20.19 | USD | 3 hours 26 minutes 30 seconds |  | 1500w Quartz Bulbs Bulbs **6 - NEW** | 9.99 | 10.20 | 20.19 | USD | 3 hours 29 minutes 33 seconds |  | 300w Quartz Bulbs Bulbs **6 - NEW** | 9.99 | 10.20 | 20.19 | USD | 3 hours 31 minutes 52 seconds |  | Sylvania Quicktronic 4x32 T8 Ballast QHE4x32T8/UNVISLSC | 29.95 | 9.95 | 39.90 | USD | 4 hours 10 minutes 54 seconds |  | Cooper Lighting Sodium Pressure 400 Watt Ballast Fixtu | 120.00 | 0.00 | 120.00 | USD | 4 hours 12 minutes 1 second |  | parking lot lights 175watt (cooper lighting) | 100.00 | 15.00 | 115.00 | USD | 4 hours 14 minutes 49 seconds |  | 3 PHILIPS SODIUM CERAMALUX C150S55/M LAMP 150 WATT | 29.95 | 0.00 | 29.95 | USD | 4 hours 44 minutes 49 seconds |  | 3 SYLVANIA LUMALUX HIGH PW SODIUM LAMP LU150/55/MED | 29.95 | 0.00 | 29.95 | USD | 4 hours 44 minutes 49 seconds |  | 2 PHILIPS SODIUM CERAMALUX C70S62/ALTO LAMP 70 WATT | 19.95 | 0.00 | 19.95 | USD | 4 hours 44 minutes 50 seconds |  | 2 SYLVANIA LUMALUX HIGH PRESSURE SODIUM LAMP LU100 | 19.95 | 0.00 | 19.95 | USD | 4 hours 44 minutes 50 seconds | |
|